Home > Products > Surge protector > CCTV spd,surge protection device for analog security systems

Share|

CCTV spd,surge protection device for analog security systems

FOB Price

USD $10 - $200 / Set

2 Sets(Min.Order)

Supply Ability 5000 Set / Sets per Month
Port Shenzhen
Payment Terms:T/T L/C D/P D/A Credit Card PayPal

Request Sample Customized Request Download Product Catalog

Contact Now

Get lowest price Inquiry Basket

Product Details

Place of Origin:

Henan, China

Brand Name:

Model Number:

CY-BL300 series

Product Description

CCTV spd,surge protection device for analog security systems

Product Description

1. Single Video Surge Protector CY-BL301

Description

This device CY-BL301 is used to protect video signal systems from the damage caused by overvoltage or static discharge, etc. by lightning strike.

Features

1. Built-in protective semi-conductive components, high through flow rate, low limiting voltage, short response time and reliable performance.

2. Wide frequency band, little insertion loss, and low standing-wave ratio.

3. Exquisite appearance, easy for installation.

Technical Data

Nominal Voltage UN	5V	Insertion Loss	Less than 0.3dB
Max. Continuous DC Voltage UC	8V	Response time	Less than 1ns
Max. Through Flow Rate	5KA	Impedance	75Ω
Max Speed VS	10M	Interface	BNC
Working Conditions	Temperature Range: -25~+85 Celcius Degree Humidity Range: 5%~95%

2. Surge Protector for Video and Power Supply CY-BL302

Description

CY-BL302 is used to protect the power supply and video devices of AC/DC-powered surveillance cameras from surge damage caused by sudden increase of potential difference between different devices when there is induction lightning strike.

Technical Data

Video Parameters	Working Voltage	8V
	Max.Continuous WorkingVoltage	15V
	Max.Through Flow Rate	10KA
	Max.DataTransmission Speed VS	20M
	Insertion Loss	≤0.3dB
	Response time	25ns
	Impedance	75Ω
	Interface	BNC
Electric Power	Working Voltage	AC24/DC12
	Max.Continuous WorkingVoltage.	40V
	Max.Through Flow Rate	10KA
	Response time	≤1ns
	Interface	terminal(L,N)
Working Environment	Working Temperature	-25°C~75°C
Working Environment	Working Humidity	5%-95% non- condenscending

3. Surge protector for Video, Power and Data CY-BL303

Description

CY-BL303 is used to protect the power supply, video and data devices of AC/DC-powered surveillance cameras from surge damage caused by sudden increase of potential difference between different devices when there is induction lightning strike.

Features

1. Three protected lines, no interference with each other and reliable performance.

2. Wide frequency band, little insertion loss, and low standing-wave ratio.

3. Exquisite appearance, easy for installation.

Technical Data

Video Parameters	Working Voltage	8V
	Max.Continuous WorkingVoltage	15V
	Max.Through Flow Rate	10KA
	Max.DataTransmission Speed VS	20M
	Insertion Loss	≤0.3dB
	Response time	25ns
	Impedance	75Ω
	Interface	BNC
Electric Power	Working Voltage	AC24/DC12
	Max.Continuous WorkingVoltage.	40V
	Max.Through Flow Rate	10KA
	Response time	≤1ns
	Interface	terminal(L,N)
Data Parameters	Data Type	RS485(Simplex, half-duplex)
	Working Voltage	8V
	Max.Continuous WorkingVoltage.	15V
	Max.Through Flow Rate	10KA
	Max.DataTransmission Speed VS	20M
	Response time	≤1ns
	Interface	terminal (+,-)
Working Environment	Working Temperature	-25°C~75°C
Working Environment	Working Humidity	5%-95% non- condenscending

4. 16 channel Video Surge Protector

5. Network Surge Protector CY-BL301WL

Description

This device CY-BL301WL is used to protect equipment of Ethernet 10 Base or 100 Bas T (like network Card, Ethernet Switch, HUB, Router, etc.) from the damage caused by overvoltage or static discharge, etc. by lightning strike.

Features

1. High through flow rate, low limiting voltage, short response time and reliable performance.

2. Wide frequency band, little insertion loss, and low standing-wave ratio.

3. Exquisite appearance, easy for installation.

Technical Data

Nominal Voltage UN	5V	Insertion Loss	Less than 0.5dB
Max. Continuous DC Voltage UC	6.8V	Response time	Less than 1ns
Max. Discharge Current	10KA	Transmission Rate	100Mbps
Nominal Discharge Current	5KA	Interface and Protected Lines	RJ45 (A: 1/2, 3/6 B: 1.2.3.4.5.6.7.8)
Others	Temperature Range: -40~+80 °C Resdual Voltage: <5V

5. Network and Power Surge Protector CY-BL302WD

Description

This surge protector is used to protect the network and power of IP cameras or wireless control cameras from the damage caused

by overvoltage or static discharges by lightning strike.

Standard

In according with standard of GB/T18802.21-2004/IEC61643-21:2000 designing.

Technical Parameter

	Network		Power
Working Voltage Un	5V		220V	24V	12V
Max. Working Voltage Uc	6V		320V	30V	15V
Max. Discharge Current Imax(8/20μs)	1-2	0.3KA	10KA	10KA	10KA
	3-6	0.3KA
	1,2,3,6-PE	2KA
	SE-PE	5KA
Limited Voltage Up(10/700/μs)	1-2	<20V	600V	60V	30V
	3-6	<20V
Insulation Resistance MΩ	≥0.4
Insertion Loss dB	≤0.5
Near End Cross-Talk dB	≥60(PASS)
Bandwidth FG	(0.3~100)M
Transmission Rate Vs	100M
Response Time Ta	≤1ns		≤25ns
Cover Rating	IP20
Size	1066628mm
Cover Material	Aluminum
Protected Lines	2 pairs(1-2,3-6)		Differential Mode,Common Mode
Interface	RJ45		Terminal block
Temperature	-40℃~70℃
Humidity	≤95%
Pressure	70kPa~106kPa

Contact Us

Henan HMCY Electronic & Technology Co., Ltd.: Contact nameleo zhao; Phone86-371-63506721; Address11th. Floor, Huamei Building, Jingnan 5 Road Zhengzhou,Henan

Product Categories

Coaxial Video Multiplexer	Ethernet media converter	Fiber optical accessories	Fiber Optical Video Converter
HD IP Camera	HD Optical converter	IP to Coaxial converter	New Products
Surge protector	video anti-jamming device	Video Balun

New Products

CCTV spd,surge protection device for analog security systems

Product Details

Product Description

Contact Us

Popular Searches

Recommended Products

Find Similar Products By Category