Semi automatic BGA rework station CCD camera optical alignment HD Touch screen BGA rework station DH-A2 laser positioning

Specifications

1,BGA rework station laser positioning
2,CCD camera and optical alignment
3,HD touch screen

 Automatic CCD camera optical alignment BGA rework station DH-A2 with laser positioning

DH-A2 Specification:

 

Total Power	5200W
Top heater	1200W
Bottom heater	Second heater 1200W,IR preheating 2700W
power	AC220V±10%     50/60Hz
Dimensions	L600×W700×H850 mm
Positioning	V-groove, PCB support can be adjusted in any direction with external universal fixture
Temperature control	K Sensor, Closed loop
Temp accuracy	±2°C
PCB size	Max 440×380 mm Min 22×22 mm
BGA chip	2X2-80X80mm
Minimum chip spacing	0.15mm
External Temperature Sensor	1(optional)
Net weight	70kg

 

DH-A2 Feature:

 

1.Embedded Industrial PC, high definition touch screen interface, PLC control, and instant profile analysis function. Real-time settings and actual temperature profile display can be used to analyzed and correct parameters if necessary.

 

2.It uses precise K-type close circuit control and automatic temperature adjustment system, with temperature module to enable precision temperature control of ±2 deg C. External temperature sensor enables temperature monitoring and accurate analysis of real time temperature profile.

 

3.V-groove PCB support for rapid, convenience and accurate positioning that fits for all kinds of PCB board

 

4.Flexible and convenient removable fixture on the PCB board which protectsand prevent damage to PCB. It can also adapt to rework various BGA packages.

 

5.Various sizes of BGA nozzles, which can be adjusted 360 degree for easy installation and replacement

 

6.Three temperature areas can independently heat and are multiple controllable and adjustable to ensure best integration of different temperature areas. Heating temperature, time, angle, cooling and vacuuming can all be set on the interface

 

7.There are 6-8 levels of variable and constant temperature controls. Massive storage of temperature curves which are Instant accessible according to different BGA. Curve analysis, setting and adjustment are all accessible via touch screen

 

8.accurate and precise temperature control

 

9.It uses high powered blower to enable fast cooling of PCB board and prevent it from deformation. There are also internal vacuum pump and external vacuum pen to assist with fetching the BGA chip.

10.Including Voice "early warning" function. 5-10 seconds before the completion of uninstalling or welding, voice reminder / warning to get the workers prepared. Cooling system will start after vertical wind stopped heating. When the temperature drops to room temperature, the cooling process will stop, so that the machine will not age after heated up.

 

11.CE certification, with emergency switch and automatic power-off protection device when emergency happens

 

Packing list 

 

1, DH-A2 BGA rework station (touch screen) 1 set

2, Displaye 1 set

3, Vacuum sucker Pad 3 piece

4, DH-A1 specification(manual) 1 copy

5, Hot air nozzle   5 piece  ( 31*31/38*38/41*41/34*34/55*55 )

6, Abnormity clip 6 piece

7, Blossom knob 6 piece

8, Supporting Screw 6 piece

9, External Temperature sensor 1 piece

More Product photo:

 

 

 

 

 

 

 

 

 

 

 

 

 

Photo about packing

 

 

 All of our machine will packed carefully with standard plywooden box, to protect it from transport.

 

Photo about our factory  

 

 

 

 

   

 

 

 

  

the products we sell one-year warranty.If you require technical support for any of your Bga rework station products, please contact our support team using the following details:

 

 

 

We always answer your questions: 24 hours a day, 7 days a week.