DINGHUA DH-CP3/ fast semi-auto operation /LCD repair machine for change mobile phone LCD

Operating Instruction:

1.Turn the power switch on.

2.Turn the temperature controller on, and set the temperature between 60 and 80 degree.

3.Wind wire on the rollers.

4.Fix the wire on the roller of the left side motor. Wind the wire from top to bottom, then adjust the steering 

button to up position. Go on winding wire bypass the front two rollers. Then turn on the rotary switch. Wind the wire 

about 3-5m, turn off the rotary switch.

5.Pull the wire tight, and wind the wire from bottom to top, then fix the other end on the roller of the right side motor. 

Adjust the steering button down. After the wire rotary half on the wheel, turn off the rotary switch. Finally, adjust the 

steering button to horizontal position.

6.Adjust the motor from the top of the skidway about 2 cm.

7.Put the LCD on the operating floor.

1. The machine can be delivered by DHL, FedEx, TNT, EMS, UPS.

2. By sea or by air. Please provide us your nearest port.

3. The delivery date is within 7 days after the receipt of payment. If you are in urgent need of it,please kindly tell us.