Old Tyre Repair Equipment

Specifications

1.full-automatic control system
2.Usage is widely
3.Security can be ensure
Old Tyre Repair Equipment

Overview  

1. Several group of heating tube be controled seprately, low energy consumption. 

2.  Equipment with blower at the end of tank, make heat distribut evenly, temperature can be controled precisely.

3. The pressure and temperature can be pre-setted and pre-adjusted.

4. Using high quality thermal insulation material,which can protect workers and avoid the waste of energy .

5. High temperature silicone seal is used by the vessel door, good seal. 

 

Application

It is used for vulcanizing many kinds of rubber product, include natural rubber, nitrile rubber, neoprene rubber, butyl rubber, roller, polyurethane rubber, silicone rubber, fluorine rubber, carbon fiber rubber.

 

 

 

Features

1.Designoftank gate.Adopt manual quick open design, rapid, easy and safe.

2. High safety. Six sets of safety interlocks is adopted, includeautomatic pressure safety interlocking, pressure automatic control, manual safety, manual vent valve, high pressure alarm, automatic safety valve. Tank gate will not open as long as there have pressure inside of the chamber, remove potential safety hazard caused by mistake operation.

3. Inflatable seal. It can seal once close doorand the pot inflate, gate cannot open only when pressure reliefed totally, seal ring’s service life is more than 1 year, it wil not wear in this period.

4. Good heat preservation effect.Use aluminum silicate rock wool with steel plate support outside,which can ensure heat won’t volatilize and shape won’t transform, insulation effect can keep 10 years.

5.Automatic control: All main process can finished accurately by PLC control system, include heating process, heat preservation process, vulcanizing process, these process can realized just turn on the switch, which can save labor costs and ensure quality of product. 

 

     

 

Descriptions

1. The automatic control system and semi-automatic control system are adopt by vulcanization machine, which can designed according to different customs’ need. The PLC control systemcan save more than 200 different processing technic, controlling the temperature, pressure and time accurately, so that achieve the desired effect. PLC control system can be equipped with a printer  to  print the temperature-time curve and pressure-time curve, the vulcanizing process can be more audio-visual and controllable vulcanizing machine .

 

2.Equipped with blower and windshield, making air blowing products indirectly, so as to the tank is easy to clean up.There is no dirty to pollute the rubber product which is processing, ensure the quality of the appearance of the  product, the hot air evenly heating products at the same time, it is conducive to improve the quality of vulcanization vulcanizing machine .

 

Technical parameters 

MOLD	CONTROL	DIA (mm)	LEN (mm)	MDM	PRE (Mpa)	TEM (°C)
F-E10.30	Automatic	1000	3,000	Air	0.1~0.85	120~160
F-E15.50		1500	5,000			120~160
F-E20.80		2000	8,000			120~160
S-E10.30	Semi-autotic	1000	3,000			120~160
S-E15.60		1500	6,000			120~160
S-E20.70		2000	7,000			120~160

 

Product picture  

Old Tyre Repair Equipment/ auto repair equipment/ tyre changing equipment/ Old Tyre Repair Equipment/ auto repair equipment/ tyre changing equipment/ Old Tyre Repair Equipment/ auto repair equipment/ tyre changing equipment/ Old Tyre Repair Equipment/ auto repair equipment/ tyre changing equipment/ Old Tyre Repair Equipment/ auto repair equipment/ tyre changing equipment/ Old Tyre Repair Equipment/ auto repair equipment/ tyre changing equipment/ Old Tyre Repair Equipment/ auto repair equipment/ tyre changing equipment/ Old Tyre Repair Equipment/ auto repair equipment/ tyre changing equipment/ Old Tyre Repair Equipment/ auto repair equipment/ tyre changing equipment/ Old Tyre Repair Equipment/ auto repair equipment/ tyre changing equipment/