FRP Fiberglass single straight ladder

Introduction about insulated ladder

Classification of insulated ladder

Insulated ladder can be divided into insulated single ladder, insulated folding-platform ladder, insulated splice ladder (A-shape ladder), insulated companion ladder (insulated telescopic single ladder, insulated splice ladder and insulated telescopic A-shape ladder) and rod telescopic ladder, etc.

Features of insulated ladder: 

(1) Non-conducting with novel and elegant appearance

(2) Corrosion resistant (corrosion resistant property of multiple gases and liquids such as acid-resisting, alkali-resisting, organic solvent-resisting and salt-resisting, etc), decay resistance and fading resistance

(3) Light weight and convenient to carry

(4) Low absorption of water and good fire resistance

(5) High-strength and light

Manufacturing process of insulated ladder

Insulated ladder adopts high-temperature polymerization pultrusion process and the material is epoxy resin with pin pull technology.

The maximal load weight is200kg, highest withstand voltage is 220kv and the others can be customized based on customer demands. However, it’s not suggested to buy special model. 

Precautions

Before use

1. Before use, check if any crack, serious abrasion and damage influencing safety on the surface of ladder, accessory parts and rope, etc.

2. The ladder should be put in solid and flat surface to avoid danger caused by falling.

3. Check if the ladder foot contacts well with ground to prevent slipping.

4. If the ladder is used above5m, please set above F8 stay wire on the middle and upper part of ladder.

5. Those who feel dizzy, dim eyesight, ill or intoxicated are prohibited to use the ladder.

6. When working around the door and window, the door and window must be fastened so that they won’t collide the ladder.

7. In the case of strong wind, please be cautious to use the ladder or not use it.

8. Pay attention to the most suitable height of ladder, never add or place anything on the ladder to increase the height of ladder.

9. Never add other structures, use or maintain the damaged ladder without the permission of manufacturer.

10. Prohibit holding waling with hands when the ladder is lifting to avoid injury of fingers.

In use

1. It’s prohibited to exceed the workload of ladder.

2. Ladder foot owns skid resistant effect, but it’s still necessary for someone to hold the ladder with hands and tread the ladder foot to prevent moving.

3. The user must war flat shoes when climbing the ladder so as to avoid accident.

4. When climbing or working on ladder, keep the body upright and in the middle of waling, never stretch to the outside; otherwise, accident may occur due to loss balance.

5. It’s prohibited to move the ladder if there is anyone on it.

6. Only one person is allowed to climb and stay on the ladder at a time. 

After use

After use, please clean the ladder and store it on dry place.

Supplement:rod ladder is4.2mat maximal and shrinking height is72cm; tee-joint ladder can’t exceed5m.