Experienced Hihg Quality Plastic Container Mould for Rice

Specifications

Plastic Container Mould
1.mold base:45#
core/cavity:S136/718H/P20
2.runner type: hot runner
3.delivery time:30 days

Plastic Container Mould

1. Detailed description of the Food Container Mould:

Basic mould information:

Runner Type	Hot Runner
Mould Size	420x390x390mm
No. of Cavity	2 cavity
Product Material	PP
Product Size	254.1x190x65.8mm
Product Weight	63g
Wall thickness	1.2mm
Surface finish	Mirror polish
Delivery Time	30 days

 

 

There are three levels of mould quality for your option.

Option A:  Level A quality(Highest Level Quality)

Mould Base: LKM,45# Steel

Core/Cavity: S136+Becu

Slider/Insert: S136

Mould spare parts: SKD

Hot Runner: YUDO

Mould Life:1,000,000 shots

Cycle Time:20s

 

Option B: Level B quality(Middle Level Quality)

Mould Base: 45# Steel,self-made

Core/Cavity: 718H

Slider/Insert: 718H

Mould spare parts: Jinghong, China

Hot Runner: Hongying,China

Mould Life:800,000 shots

Cycle Time:22s

 

Option C: Level C quality(Lowest Level Quality)

Mould Base: 45# Steel,self-made

Core/Cavity: P20

Slider/Insert: P20

Mould spare parts: Jinghong,China

Hot Runner: Hongying,China

Mould Life:500,000 shots

Cycle Time:23s

 

Attention pls:

Price varies in different quality level. When you send us the mould inquiry, please offer the following information:

1) Quality level you choose: Level A/Level B/Level C

2) food container Photo

3) food container Dimension: L*W*H

4) Wall thickness

 

2. Food Container Mould Making Process

 

Processing	Time
Prepare Steel	3 days
CNC Machining	5 days
Drill	2 days
Heat treatment	5 days
High speed CNC Machining	6 days
Assembling and Fitting	3 days
Polishing	4 days
T1 mould test	2 days

 Total: It is 30 days for first mould testing after mold design is confirmed.

 

3.1 DESIGN STAGE                               3.2 MACHINING STAGE

 

3.3 Mould Testing

  

3. Food container Mould Quality Control

For the Q/C of mould, there are 3 steps:

1. Mould Material Q/C

- Mould Steel Checking (Hardness, flaw detection)

- Mould Standard Spare Parts Checking (hardness, size, flaw checking)

2. Mould Making Process Q/C

- design checking (part design, mould design, mould engineering drawing)

- Each part of mould’s size checking after machining according to 2D drawing

- mould testing (check mould running condition)

3. Check with customer’s requirement again before mould shipping.

 

4. Food container Mould Pack and Shipping

Anti-rust oil is painted first, then Plastic film, and finally Wooden Case.

Sent together with the mould:

a)      Mould manual instruction

b)      engineering drawing in flash disk

c)      One more set of mould spare parts: heater, ejector pin, bush, water nozzle, water pipe, hanging ring.

 

 

5. Food container Mould Maintenance

a) When the mould is vacant, spray the anti-rust oil

b) To clean the gate and cooling system regularly

c) Avoid to use recycled material if the mould is suitable for virgin material only

 

6. After-Sale Service

 a) one-year after-sale technique support