Polymer coating Powder free Surgical Gloves (CE&FDA)

Specifications

1.FDA approved &CE marked
2.Three layer design with polymer coating
3.Allow wet-donning
4.Gamma sterile, powder free
5.OEM

1)        Double-layered design utilizes most advanced global technology of latex double-dipping procedure.  On-line double-dipping process minimizes pin-hole rating for optimal protection.

2)        Micro-nanometer chlorination process offers a slippery inner surface for easy donning.  Outer surface maintains a “tacky” non-slip surface for secure gripping of medical appliances.

3)        Special water processing to reduce the chances of allergic reactions by water-soluble protein from natural rubber.

4)        Polymer-coated layer for inner surface of gloves enable water-solubility and anti-bacterium capability.  Additionally, polymer-coated layer enables convenient wet and dry donning.

5)        Roughened texture of outer surface provides secure gripping of medical instruments.

6)        Complies with powder residue requirements for US FDA Standards.

7)        Following operation procedure, glove is easy to remove for minimal risk of possible contamination between glove user and patient.

8)        Quality medical-grade inner wallet to ensure sterility status before opening the pouch.

9)        Gamma g-60 sterilization for safe processing and minimal residue risk.

 

ITEM NO	1610
PRODUCT DESCRIPTION	Latex wet donning Surgical gloves, powder-free, anatomic shape, beaded cuff, textured surface in the grip area, with size embossed, sterile.
SIZE	5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0
OVERALL LENGTH	mm       290 ± 5
PALM WIDTH	SIZE     5.5         6.0        6.5         7.0        7.5          8.0           8.5         9.0
	mm     70±6  76±6   83±6   89±6  95±6   102±6   108±6  114±6
THICKNESS	Finger               Palm                 Cuff
	mm       0.22 ± 0.03     0.22 ± 0.03      0.22 ± 0.03
PHYSICAL PROPERTY	Before Aging          After Aging
	Tensile Strength                    24Mpa         18Mpa   (min)
	Stress at 500% elongation           5.5Mpa(MAX)    ---- Ultimate elongation                 750%          560%   (min)
SAMPLING PLAN	ISO 2859, Manufactured in compliance with current GMP requirement.
	AQL                                   Inspection Level
	Pinhole	1.5	G-1
	Major/Minor	2.5/4.0	G-1
	Physical property & Dimensions	4.0	S-2