cheap square wall-mounted manual liquid soap dispenser

   cheap square wall-mounted manual liquid soap dispenser

A: Installation instruction
1.Firstly ,press lightly the bottom shell C,then open the outside shell A,take out inner bottle B.

2.Second

a.Find the screw hole in back shell,drill hole on the wall,then fix the products on the wall with plastic screw and screw nail.
b.Or use our matched super gel fill in the gel groove of back shell,and adhere to the wall.You must add liquid soap after 24 hours,or it will fall off because of a rope of sand .)

3.Last,put the inner bottle to soap dispenser,cover outside shell,and press the outside shell,liquid will flow out.

Installation finished,welcome to use.

B: The feature of product and instruction:
1.Soap dispenser use class A ABS raw material, and increase anti-aging UV ingredients.
2.Liquid exit valve use unique silicone material, liquid quantity is more , reached 1.6 ml every drop.
3.Two kinds of inside bottle: addable and disposable. Factory standard inside bottle is addable.
4.The mechanics principle design on the products is very easy, press on the surface shell, liquid flow out.
5.Two plastic bar on the bottom is special tough material, instead of hardware spring,will not rust.

                    shinny surface, antioxidant. 

                                            Size: 8.0*13.5*22.0cm

               • Stick on the wall or install by screw. both ok

              Refillable LDPE Plastic cartridge, 1.6CC per dose. No leak. 

                                            Over 50,000 press times 

1.We are Alibaba Assessed 4 years Gold Supplier.

2.We are a factory manufacturing soap dispenser,paper dispenser and aerosol dispenser,best production capability ,best quality control, Best Service .

3.100% QC inspection Before Shippment.

4. competitve price.