700N^m/h CNG Mobile Refilling Station with CNG Generator

1. General Introduction

YDZZ-700 Mobile CNG Daughter Station consists of CNG compressor, high pressure CNG storage  cascade, CNG dispenser, CNG generator and container cabinet.

The daughter station skid shall be covered by container cabinet and connected with CNG tubes trailer(WP 250BAR) as gas resource by hose. CNG generator consumpts CNG from CNG tubes trailer to work as power supply unit .

The dispenser with three lines and double nozzles shall be installed in the skid. During refilling, firstly the high pressure natural gas will guide into buffer tank to decrease pressure for refilling by first line of CNG dispenser. When the pressure in tubes trailer decrease below 200 BAR, the CNG compressor starts work and refill CNG into loaders by double nozzles dispenser.

This CNG mobile daughter station has the features of reasonable structure, excellent automatic control model, lower energy consumption, lower noise, easy operation and maintenance. It is specially designed for non-piping region.

2. Equipment checking list

   (1) Compressor for daughter station.

   (2) CNG storage cascade system.

   (3) CNG dispenser. ( 3 lines double nozzles)

   (4) CNG generator.

   (5) Safety relief system.

   (6) PLC control system.

   (7) Explosion-proof cabinet.

   (8) Detector for combustible gas.

   (9) Explosion-proof lamp and container.

3. Technical Parameter of daughter station skid

3.1 Technical Parameter

(1) Compression Medium: CNG 

(2) Average Gas Flow Capacity: 700 Nm^3/h

(3) Inlet Pressure: 0.3-20 MPa

(4) Outlet Pressure: 25 MPa

(5) Cooling Method: Air cooling

(6) Gas Inlet Temperature:  ≤ 40℃

(7) Noise Level:  ≤ 75 dB(A) (metal cabinet)

(8) Control Model: Automatic on and off

(9) Skid Dimension: 7500x2350x2300mm

(10) Weight: 8.5 MT

3.2 Working Condition

(1) Ambient Temperature: -10 ℃--+40 ℃

(2) Relative Humidity: 40%-90%

(3) Motor: d II BT4, IP55

(4) Power Supply: 380V/50Hz

(5) Power: 31.5 KW

4. Technical parameter of Main components 

4.1 CNG compressor

 (1)  Inlet Pressure: 3-20 MPa

 (2) Outlet Pressure: 25 MPa

(3) Average Flow: 700 Nm^3/h

(4) Power of Motor: 30 KW

(5) Cooling Method: Air cooling

4.2 High pressure CNG storage cascade

(1) Max. Pressure: 25 MPa

(2) Volume of each cylinder: 120 L

(3) Cylinder Q'ty: 4 pcs

4.3 CNG Dispenser

(1) Working Pressure: 25 MPa

(2) Flow of Single Nozzle: 2-40 Nm^3/h

(3) Nozzles: double nozzles

(4) Lines: three lines

4.4. Control System

(1) Sound alarming and stop of compressor when inlet pressure is too low.

(2) Compressor will stop when discharge pressure of final stage is too high.

(3) Sound alarming and stop of compressor when lubrication oil is too low.

(4) Sound alarming and stop of compressor when overload of motor.

(5)  Sound alarming and stop of compressor when CNG leak.

4.5 CNG Generator

(1) Output Capacity: 100/110 KVA

(2) Output Power: 80/88 KW

(3) Power Factor: 0.8 (deferred) 

(4) Frequency: 50 Hz

(5) Output Voltage: 400/230 V

(6) Max. Spare Output Current: 144.3/158.8 A

(7) Dimension: 3100x1300x2000mm

(8) Net Weight: 1920 kg

(9) Motor

    Type: LQBGITAA5.9-G2

    Rotate Speed: 1500 RPM

    Max. Power: 92 KW

    Cylinder Q'ty: 6 pcs

    Total Volume of Cylinder: 5.9 L

    Gas Consumption: 0.33 m^3/KW.H

    Inlet Pressure: 100 KPa

    Gas Inlet: turbocharging

    Compression Rate: 17.5:1

5. Warranty Time

  Luxi Group can provide 24 months warranty time for our clients since client's receipt of our station. Any defects about the spare parts, structure, installation which is caused by our mistake will be undertaken by Luxi New Energy. The cost shall also be borne by us.

6. Luxi New Energy Service

   We not only provide technical training, assembling training, operation training, but also the on-site installation guide can be provided. 

   The questions will be responsed within 3 hours after get the notification of clients. And our engineers will be dispatched to your side for on-site serviec within 24 hours if the on-site service is needed.

7. What we can do for CNG field?