Contact Platform Support
Help CenterHigh Efficiency 180 kw Natural Gas Generator With CE
Related Products
-
120KW CNG Natural Gas Generator Set Without SoundproofUS$ 7,688 - 298,015MOQ: 1 Set -
180kw Natural Gas Generator Set Made in China With Methane , LNG,CNGUS$ 5,000 - 17,000MOQ: 1 Set
-
Hot Sell Russia 600KW Natural Gas Generator Set Methane Fuel CongenerationUS$ 5,000 - 36,000MOQ: 1 Set
-
1MW Low Speed Biomass Syngas Wood Gas Engine GeneratorUS$ 8,453 - 298,015MOQ: 1 Set
-
CE Approved Biomass Gas Generator With Factory PriceUS$ 8,500 - 299,999MOQ: 1 Set
China factory supply 10-1000kw natural gas generator with ce approved
1. Company Introduction
1) manufacturer for10 years
2) Factory area over 40000m2
3) Starff over 260 employees
4) All kinds of gas generator set
2. Gas requirements for natural gas generator
Within 1m to the intake valve of gas generator set
1) CH4 content ≥70%;
2) Pressure:80-200 kpa, pressure changing rate<1kpa/min;
3) H2S<20mg/Nm3;
4) Moisture content <40 g/Nm3;
5) Impurity particle size <5µm, impurity content <30 mg/Nm3
3. Worksite requirements for generator
a) Ambient temperature between -40ºC~45ºC;
b) Relative humidity less than 90%(35ºC);
c) Site elevation not higher than 2000m;
d) For outdoor installation, simple rain shelter is required.
4.Parameters of 180kw natural gas generator set
| Model Number (Engine Type) | LHNG180 |
| Brand Name | LVHUAN |
| Prime Power/Standby Power | 144KW/180KW |
| Rated Speed | 1500/1800RPM |
| Rated Frequency | 50/60Hz |
| Rated Voltage | 400V/230V |
| Phase | AC 3-Phase, 4 wire |
| Voltage Stability | ≤±2% |
| Voltage transient | ≤±10% |
| Voltage Stable time | ≤1s |
| Heat consumption | ≤11mj/kw.h |
| Lubricant consumption | ≤1.0g/kw.h |
| Engine Capacity | 25.80 L |
| Cylinder Number | 12 |
| Cylinder Bore | 135mm |
| Stroke | 150mm |
| Starting System | DC 24V electric motor |
| Cooling method | water cooler |
| Lubricant method | Passive and flying lubricant |
| Isolation class | H |
| Protection | IP23 |
| Alternator | Chinese Stamford |
| Power Factor | 0.8 lagging |
| Exciting method | brushless |
| Colour | your choice |
| Certificates | ISO 9001:2008, CE |
| Warranty | 1 year or 1000 running hours which arrives first |
| Type | Open |
| Control system | Automatic alarm system |
| Size | 3200x1350x1750mm |
| Weight | 2900kg |
(Single set power supply range: 10 - 600 kw, ≥2 sets parallel together to form large power, Eg. 600kw*2 sets = 1200 kw)
5.Equipment Picturers
6.Foreign Visitor
7.Service
1.pre-sale service:
(1)We will send our engineer to prospect the site of power station free to charge.
(2)According to the situation of site we can supply you many drawings:like power station floor plan,
engineering flow sheet of circle cooling system,genset installation,genset foundation,electrical connection and some other techincal support etc.
2.Sale service:
(1)we will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment.
(2)We will debug the generator set till it can generate power successfully.
(3)We will also supply a technical training to the operators.Orcan send your staff to our company.We can train you till you can operate the generator set.
3.After-sale service:
(1)Our every engineers are in charge of different area,we will response periodically and support you
technical service free of charge,
(2)For the quality problem, we will service for you free of charge during the guarantee period.
(3)One year guarantee period and lifetime service.
(4)we solve quality problem in time when genset doesn’t work,We insure to help our clients to gain the biggest economic profit.
8.FAQ:
1.How to choose the right model?
A: It depends on real output power, Voltage, Frequency and gas type.
2.What is the oil consumption and capacity per hour?
A: 1.0-1.63g of lubricant oil consumption per hour. 1.0 Cubic meter gas can produce 1.5-3.0kw/h power. The capacity depends on gas energy. E.g 1.0 Cubic meter natural gas produce about 3.0kw/h
3.What is the overhaul?
A: About 30000 working hours. A week is enough to finish.
4. What is the warranty?
A: 1 year. Inside this 1 year, we offer all spare parts free of charge. After this period, spare parts are not free. But, a set of spare parts will be shipped together with machine free.
5. How is the service?
A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
Please feel free to ask question and quotation.
Send Inquiry to This Supplier
You May Also Like
-
Gas GeneratorNegotiableMOQ: 1 Set
-
Hot Sale 10kw/12.5kva 50HZ Biogas Generator SetNegotiableMOQ: 1
-
Fixed/mobile Diesel/gasoline Powered GeneratorsUS$ 1500 - 80000MOQ: 1 Piece
-
Industrial Psa Oxygen Generator / Oxygen Plant Cost / Oxygen ConcentratorUS$ 2,000 - 200,000MOQ: 1 Set
-
Coal Gasifier/furnance for Electric Generator PowerNegotiableMOQ: 1 Set
-
High Quality Best Coal Gasifier PlantUS$ 6,000 - 80,000MOQ: 1 Set
-
60-128KW Natural Gas Generator SetNegotiableMOQ: 1
-
New 3g Ceramic Ozone MachineUS$ 200 - 300MOQ: 1 Set
-
Turbine Hydraulic Oil Renewal MachineUS$ 3,000 - 50,000MOQ: 1 Set
-
Filtration Rating: 3, 6, 10, 25um Air Separation PlantUS$ 30 - 35MOQ: 10 Pieces
