Krrass mild steel sheet 4x4000mm hydraulic bending machine with 800mm backguage

Krrass mild steel sheet 4x4000mm hydraulic bending machine with 800mm backguage

1. Standard Equipment:                                                                        

• Estun E21NC control System
• Powered Depth Y-axis&Back gauge X-axis
• DELTA Inverter controlled back gauge
• HIWIN Ball screws & Polished rod with 0,05mm accuracy.
• Plate Support Arms
• Germany Bosch-Rexroth Hydraulic
• Germany EMB Tubing connector
• Germany Siemens Main Motor
• Tele mecanique/Schneider Electrics
• Hydraulic &Electrical overload protection
• Top and Bottom Tooling(86°,R0.6mm)
• Safety Standards(2006/42/EC):

2. Safety Equipment:                                                                      

1.EN 12622:2009 + A1:2013          2.EN ISO 12100:2010      3.EN 60204-1:2006+A1:2009

• Front finger Protection(Safety light curtain)
• South Korea Kacon Foot Switch(Level 4 of safety)
• Back metal safe fence with CE standards
• Safety relay with Monitor the pedal switch and safety protection

3. Estun E21 NC Control system:                                                              

• Back gauge and block control
• Control for general AC motors,frequency inverter
• Intelligent positioning
• Stock counter
• Holding/decompression time setting
• Program memory of up to 40 programs Up to 25 steps per program
• One side positioning
• Retract function
• One key backup/restore of parameters
• mm/inch
• Chinese/English

Watch Video on Youtube

/watch?v=m7M1McRIBMk

/watch?v=m7M1McRIBMk

Check Our Packing Video on Youtube

https://youtu.be/8cmx2DUqKV4