E21 NC WC67K 2500mm sheet metal bending online with CE

1. Standard Equipment:                                                                        

• Delem DA41SCNC control System
• Powered Depth Y-axis&V-axis&Back gauge X-axis (X-axis 0.1mm/Y-axis 0.1mm)
• Servo motor control block
• HIWIN Ball screws & Polished rod with 0,1mm accuracy.
• Plate Support Arms
• Germany Bosch - Rexroth Hydraulic
• Germany EMB Tubing connector
• Germany Siemens Main Motor
• Tele mecanique/Schneider Electrics
• Hydraulic &Electrical overload protection
• Top and Bottom Tooling(86°,R0.6mm)
• Safety Standards(2006/42/EC):

2. Safety Equipment:                                                                        

1.EN 12622:2009 + A1:2013     2.EN ISO 12100:2010   3.EN60204-1:2006+A1:2009

• Front finger Protection(Safety light curtain)
• South Korea Kacon Foot Switch(Level 4 of safety)
• Back metal safe fence with CE standards
• Safety relay with Monitor the pedal switch and safety protection

3. Delem DA41S  CNC Control system:                                                              

• Servo control technology;
• High light light liquid crystal display sreen with multi languages inteface ncluding Chinese;
• Tooling parameters setting,bending angle programming;
• About 100 programs are stored,and there are 25 operations in each program;
• The escaped material is programmable,the processing quantity is accuntable;
• There is memory to power off ,and conversion between metric system and inches system.
• Backguage position display, resolution in 0.01mm

The best bending results you ca bend longer and deeper parts with standard AC/MB-Bend Series.

Watch Video on Youtube

/watch?v=KuumBqGHHnc

• Totally EU streamlined design,Monoblock by welding robots & aparatus and stress relief process by Annealing treatment.
• Hydraulic synchronised positive stop design,and by DELEM programmable controller assuring accurate repeatability &ease of use.
• Integrated hydraulic system(Bosch-Rexroth form Germany)allowing rapid approach switching automatically to slow bend.
• Inverter with da41S System operated back gauge with quality support fingers also with vertical adjustment
• Inch, single mode being designed for the machine and reversing and maintain time can be controlled by the time relays.
• Safe fence and the electric inter locker have been designed for the machine to ensure the operation safety.

 Watch The Details on Youtube

/watch?v=KuumBqGHHnc

Check Our Packing Video on Youtube

https://youtu.be/8cmx2DUqKV4