Home > Products > Stamp Raw Material > liquid photopolymer for stamp
liquid photopolymer for stamp
- 1000 Box / Boxes per Month
- Nhava sheva
- T/T
- Kunlun Ethylene Propylene Rubber J-0010, J-0030 EPDM/Ethylene Propylene Rubber
- Kunlun Brand Epm Thickener Viscosity Improver J-0010 Epm/Ethylene Propylene Rubber Epm Ocp
- Azithromycin extraction resin
- Erythromycin extraction resin
- Extraction and separation of peptides resin
- Copper ions in ion exchange resin adsorption jaundice wastewater
Product Details
Place of Origin: | Maharashtra, India | Type: | Other | Brand Name: | kivi markings |
Model Number: | Flora BL -150 |
Product Description
Specifications
* Excellent printing quality* Good dimensional stability
* Long life if not exposed to direct sunlight
* Long working life
PROPERTY | BL - 125 | BL - 132 | BL - 150 |
Hardness (Shore A) | 25 | 32 | 50 |
Viscocity (CPS) | 30,000 | 30,000 | 30,000 |
Thickness Range | 2-65 | 3-65 | 2-5 |
Ink Compatibility | Water & Gylcol Based | Water & Gylcol Based | Water & Gylcol Based |
Hardened Plate | |||
Tensile Strenth | 1.6 | 1.6 | 1.6 |
Elongation | 70~80 | 70~80 | 70~80 |
Application | CORRUGATED BOX | CORRUGATED BOX | RUBBER STAMP |
* Flora Photopolymer resins are photosensitive polyurethane elastomer having the form of a coloured viscous liquid. This liquid polymerizers when exposed to an ultraviolet (UV-A) light source having spectrum range between 315 and 380 nanomerters.
* The polymerization process converts the liquid resin into an elastomer that is commonly used for making flexographic plates for printing paper, corrugated box (Flora 125/132) and for making Rubber Stamp (Flora 150).
* Water washable, no need for organic solvents during the process
* Resins are non-toxic, non corrosive, non harmful monomers.
* Large dimension plates can be produced in less than one hour.
* Low specific gravity (1.025 kg/litre) and, therefore, more volume for the same weight.
* Enviormental friendly.
* Water based ink containing glycerine or alcohol in little concentration, do not affect the life of the plates. Oil based inks can sometimes damage the plates whilst organic solvents (i.e. ketones, esters, hydrocarbons or pure alcohols) can develop a very aggresive action against all photopolymers.
* Excellent printing quality
* Good dimensional stability, tackfree plate
* Long life if not exposed to direct sunlight
* Long working life, long press life
* Easy mounting on printing presses
* Compatibility with both water reduced inks and oil based inks
* Extremely economic plate price
* Store polymer at temperature between 2° and 28° C in closed container
* When producing stamps wear protecting clothing, gloves and UV resistant safety glasses
* Do not expose the liquid photopolymer to the direct sunlight.
* Long working life, long press life
* Easy mounting on printing presses
* Compatibility with both water reduced inks and oil based inks
* Extremely economic plate price
The biggest advantage of making printing plate for corrugation from Liquid Photopolymer is COST. The per Sq. Mt. cost of plate making from Liquid Polymer is substantially lower then conventional sheet polymer. Beside that, liquid polymer system is environmentally friendly since no hazardous organic chemical are used in washing plate. The plates from Liquid polymer are simply washed by water with small amount of detergent.
In Australia 90 % while in Europe and US 80 % corrugation printer are making plates from Liquid Photopolymer. The obvious resin for choosing Liquid Polymer over sheet polymer and rubber engraved stereo is cost and environmental friendliness of system. In south East and China large number of printer are converting the system to Liquid Polymer rather then Sheet Polymer. With very fast development in chemistry of UV curable Liquid Polymer printer are able to meet the demand of half tone printing at present market. Due to re-claim system for uncured polymer, cost of plate can be controlled.
Safety Information |
* All Flora resins have an LD50 exceeding 5000 mg/kg of body weight. This means that they are non-dangerous products (LD50 is the Lethal Dose which effectively kills 50% of laboratory rats).
* When producing stamps wear pprotecting clothing, gloves and UV resistant safety glasses
* Do not expose the liquid photopolymer to the direct sunlight.
* Long working life, long press life
All liquid methacrylic monomers are chemicals having a low molecular weight and, therefore, are potentially irritating to the skin and eyes. They can cause sensitization by skin contact if continuosly used without precautions. Then, it is advisable to use all liquid photopolymers wearing suitable protective clothing, gloves, eye and face protection. some protective creams are also very effective. Finally, a good ventilation of the working area is essential.
In case of contact with skin, wash with warm water and soap. The use of organic solvents to clean the skin must be absolutely avoided !
In case of contact with eyes, irrigate with plenty of water for 15 minutes and get prompt medical attention where necessary.
Please read and understand the specific Material Safety Data Sheets supplied upon request.
Contact Us
- KIVI MARKINGS
- Contact nameArun Jayantilal Mehta
- Phone91-22-26866767
- Address515, Manish Chambers, Sonawala Road, Goregaon (East)
- Adsorption resin extraction purified cephalosporin fermentation solution
- Natural Vitamin E Extraction Ion Exchange Resin
- Artemisinin Extraction resin
- Artemisinin Extraction resin
- Pubescent holly root total saponin extraction resin
- Gentiopicroside extract resin
- Astragaloside extraction adsorbent resin
- Dichlorophenol adsorption resin
- Wastewater organics'adsorption resin
- Ion exchange resin for mercury-containing wastewater treatment
- Arsenic Removal of Ion Exchange Resin in Drinking Water
- Ion Exchange Resin for Phosphorus Removal
Popular Searches
- Pine Rosin
- Colophony Rosin
- Rosin Modified Phenolic Resin
- resin set
- pvc resin s1000 sinopec
- vietnam gum rosin
- polyester resin price
- polyacrylate de potassium
- Water Retention Agent Sap
- Upr Resin
- acrylic resin styren
- pvc resin taiwan formosa
- Furfuryl Alcohol Resin
- Polyol Mdi
- Mdi Polyol
- gum rosin wg grade
Recommended Products
- CAS 61-19-8 adenylate 5' -adenosine monophosphate Other chemical products
- CAS 68555-36-2 Diaminourea polymer/polyquaternium-2 Polyquaternary ammonium polyurea - based polymer used for surfactants etc
- CAS 6440-58-0 1 3-dihydroxymethyl-5 5-dimethylhydantoin DMDM hydantoylurea Can be used for shampoo cosmetics and so on
- CAS 839-90-7 Tri (2-hydroxyethyl) isocyanurate (THEIC) 1 3 5-tri (2-hydroxyethyl) cyanuric acid For organic synthesis
- CAS 124-10-7 Tetradecanoic acid methyl ester Methyl myristate Can be used for organic synthesis
- CAS 3228-02-2 4-isopropyl - 3-methylphenol 4-isopropyl - 3-cresol O-cymene-5-ol For cosmetic purposes
- Good Power of Hiding Temperature Resistance Whole sale Pigment for Car Paint
- Hydroxy ethyl cellulose
- Hydroxypropyl methyl cellulose
- Shoe insole with hot melt adhesive bonding firm not open glue high temperature manufacturers of direct sales
- Feed Additive C17H20N4NAO9P Riboflavin 5 Phosphate Sodium
- Sodium Dichloroisocyanurate CAS 2893-78-9 Water Treatment Chemicals
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Arun Jayantilal Mehta
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-