Camera Timer Remote Control for Canon 60D/600D/1100D

Specifications

Camera Timer Remote Control for Canon/Pentax/Samsung/Contax/Hasselblad,JYC TC-C1

Suitable for:

Canon:Powershot G10/ Canon E0S30/EOS33/50/50E/300/300D/300V/350D(Rebel Xti)/400D(Rebel Xti)/450D(Rebel Xti)/500D(Rebel Xti)/1000D(Rebel Xti)/60D/600D/1100D
Pentax:K10D/K110D/K100D/K20D/K200D/KM/K5/Cs205,*ist D/DS/DS2/DL/DL2/K10 Remote Switch Shutter,Pentax MZ-6, MZ-L, ZX-L;Sigma SD1
Samsung: GX-1L. GX-1S,GX-20,GX-10
Contax: 645/Nl/Nx/N/Digital/LA-50      

Hasselblad:  H/H1/H2/H2D/H1D /K7

Introduction:

1.Except for replicating all functions of a camera's shutter release button, it still has the function of Self-Timer, Interval Timer, Long-Exposure Timer and Exposure Count.
2.Good for time-lapse photography such as flowers blooming and astrophotography.
3.LCD panel can be illuminated

Features:

1.Delay / Self Timer (DELAY)
Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds. 

2.Interval Timer (INTVL)
The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached. 

3.BULB/Long Exposure (LONG)
It allows you to take time exposures up to 100 hours long. 

4.Exposure Count (N)
This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times. 

Specification:

Package Content:

Timer Remote Cord x1

AAA Battery x2

English Instruction Manual x1