high quality factory manufacturer 1.75 3.0MM PLA ABS 3d filament

1.Relative to the ABS, PLA has the following advantages
♦   PLA's processing temperature is low, can be processed at 185 degrees;
♦  odor harmless, good smell like fried corn ;
♦   high strength, high stiffness, suitable for DIY players do duplicate printer components;
♦   forming performance is excellent, thermoforming dimensional stability, low shrinkage (0.3%),layers stick each other well;
♦  brightly colored, translucent color;
For customers, we are free to provide technical information counseling, ensure a smooth PLA used, for the market often reflects the PLA block nozzle solutions and non-stick hot bed.

2.Our advantages

We select of premier grade ABS material, low water absorption, high toughness. Factory direct sales, inexpensive, buy more, bigger discount! !

3.Service

♦  Quality assurance.

♦  Reply your enquiy in 24 working hours.

♦  Experienced staff answer all your questions in fluent English.

♦  Customized quality is available,OEM are welcome.

♦  Exclusive and Unique solution can be provided to our customers by our well-trained and      professional engineers and staffs.

♦                               Production Control                        ♦

1.Produce process

♦ Before produce extruding filament ,we will dry ABS and PLA for a enough time (3-5 hours).

♦  Mix with colors masterbatch or colors powder, all which .certified with ROHS.

♦  Adjust temperature and dragging rate , make filament diameter range at 1.6-1.8mm/2.8-3.0mm, roundness       +/-0.05mm, each spool net weight 1kg+/-0.02kg

      IV we put all filament spool in shelf, different kind in different shelf, all categories arranged orderly.

2.Productiong quality control

 ♦  we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.

♦  keep each record filament samples sent to customers, build a tracking able document.

♦ when the filament put on shelf longer than half a year, we will dry the filament again.

3.About waste & recycle

Much time you will find some black filament is too brittle, that added and mixed with some recycle and scrap after produced.

We haven’t produced with scrap outlet, rework&recycle material, or dispose, but for quality assurance purpose.

we have engineers that specialty in color formulation ,plastic modification, packaging, quality control ,producing control, we can do according to your requirements .

  ♦                             Packaging & Shipping                ♦  

1.Packaging

       We put each filament /spool on seal PE bag with desiccant , then smaller carton, then out big box

       We also have vacuum heated bag to replace of PE bag, make better avoid moisture.

2.Payment accept

♦  Paypal

♦  Bank account wire

♦   Western Union wire

3.Go By Express 

if you live where far from China(like Russia, Middle East, East Euro, South America ,Africa), we will choose go by china post, maximum 2kg, , it is cheaper go by air when quantity bigger than 50kg .

if East/South Asian, West Euro, North America, Australia are good price go by express and not quantity limited.

4.Go By Sea

when quantity more than 300kg, we can go by sea, it is very cheap, about $350 -500.and some fee you should pay to local port and warehouse, you can contact the shipping company to take the goods from port to your address.

5.Order Quantity From Factory

     We have 10 tons in stock each month,about 50-100kg of each kind .

when you can order one material(PLA or ABS), one color (natural,white,black,red,green,yellow,orange,blue,purple, grey),one diameter(1.75/3.0mm), minimum quantity 100kg, you can get the best and smallest factory price, you can start from natural,white,black, since these three colors are sale well.