Smart CNC router machine for plastic/pvc etc

Model No.

TC-1625

Table Size

1800mm×2900mm

Effective Working Area

1600mm×2500mm

Z Axis Travelling

180mm

Feeding Height

200mm

Body Frame/Structure

8mm Heavy-duty Steel

Table

Aluminum alloy, T-slot

X,Y Transmission

Germany rack and pinion

Z Transmission

Taiwan HIWIN 2510 dual-nut ball screw

Rail Configuration

Taiwan HIWIN 25 Linear square guide rails

Positioning Accuracy

±0.1/300mm

Spindle Rotating Speed

0-24000rpm

Spindle power

4.5KW(3.0,5.5,6kw for option)

Y Axis Drive Motor

Shenzhen Leisai Stepper Motor(Double Motor)

X,Z Axis Drive Motor

Shenzhen Leisai Stepper Motor

Movement Control

NCSTUDIO Control System

Carving Instruction

G code*,U00*,mmg*,nc

Resolution

0.00625/pulse

Collet

3.175mm,4mm,6mm,8mm,10mm,12.7mm

Cooling system

Water pump

Power

380V,50HZ±10(Internal Switch Power)

Movement Pattern

Gantry Moving

The Driving Motor is the executive component of the automatic control system, it works with the simple push of a button. The motor we use for our CNC engraver can be steping motor/ Servo motor, and the brand is optional. 
AC Servo motor is more popular for its advantages on performance and accuracy, but more costly. The brand can be Schneider/ Yaskawa etc. With different prices.

There are two kinds of spindle: Water cooling and Air cooling spindles. And with different 
power options: 1.5KW/ 2.2KW/ 3.0KW/ 4.5KW/5.5KW/6KW/7.5KW etc. The output voltage and frequency can be adjusted timely by a frequency converter. Advantage: work with high frequency, stable, low noise, fast heat dissipation, and long operating life.

We use Linear square guide rails offered by HIWIN of Taiwan. The coefficient of rolling friction
is small and positioning accuracy is much higher than sliding friction. The accuracy can be at μm level. It can work with high speed and low power dissipation, and can easily be assembled and replaced.