Light Channel

Specifications

Features:
1) Light channel is manufactured from hot-rolled low carbon steel with galvanized or epoxy finish.

Features:
1) Light channel is manufactured from hot-rolled low carbon steel with galvanized or epoxy finish.

2) Wall thickness is 2.5mm, standard delivery length is 3m or 6m.

3) Wall thickness can be 2.0mm and 1.5mm for light hanging system, for beam load capacity, use 80% and 60% of appropriate load chart separately.
4) When P41 series are used as beam, multiply uniformly distributed load from the table by 0.5 for concentrated load and corresponding deflection by 0.8.

5)Channels with side ribs, for beam load capacity, use 120% of appropriate load chart separately.