Sindeice small range tube ice making machine 1T/24h 2T/24h 3T/24h

Sindeice hot sale tube ice making machine 10T/24hrs

Characteristics

1. The special ice-making method can remove impurity of water. The ice is hard, powderless, cleanness, glittering and hollow shaped.
2. Ice tube external diameter: Φ22, Φ29, Φ35, Φ42 for option. Inner diameter, such as 3mm to 15mm, could be made according to your specifically requirement.
3. The shape of ice is suitable for storage and transport, applicable for a variety of field.
4. We use Solilworks to simulate assembly all of equipments, optimizing the structure of product. So HERBIN ice machine is easy to handle and maintain.
5. SUS304, PE, Aluminum alloy are used to make evaporator. Round corner design makes it easy to clean the inner of ice machine.
6. The special alloy material and heat treatment of evaporator provide high heat conduction efficient. Each condensing unit was installed heat exchanger between suction tube and liquid feeding tube, control systems of condensing temperature, return gas superheat, and return oil. Those ensure the condensing unit work under the best condition, get higher C.O.P value
7. 80% of parts of refrigeration equipment use the well-known brands, such as condensing brands are Bitzer, Maneurop, Bock; refrigeration parts brands are Hansen, Danfoss, Emerson, Sporlan, Saginomiya.
8. -20~+50℃ ambient temp., +0.5~+45℃ water inlet temp. is prefer for the refrigeration equipment. We will design the mechanisms to your specific requirement, for example, different power supply.
9. The refrigeration equipment is simple and reliable. Unnecessary transmission parts were cancelled. Lower water level, water flow, full of ice, low/high pressure of compressor, pressure of condensing are set to ensure the equipment safety, reliable. Trouble-free continuous operation of equipment for more than 30,000 hours.

The technological process of ice-making

   After the machine works, fresh water is fed into the water tank through pipes, pumped into the water distributor over the water inlet. The water flows down the inner wall in spiral way and changes heat with refrigerant. Part of water turn to tube ice. And the unfrozen water returns to the water tank. This cycle goes on and on until tube ice reaches a certain thickness.

   In a certain time, water stop flow, the scrappers begin to work. Hot air was works on the surface of pipes; ice dissolves and drops into the scrapper, being cut into small pieces of tube ice.

Technical Data

*The technical data based on 25℃ ambient temp.18℃ water inlet temp.

*Power supply: 3P / 380V / 50HZ   3P/220V/60HZ

*Water inlet pressure: 0.1-0.5Mpa

*Refrigerant: R404A (R22 is optional)