TONVA 5L bottle plastic blowing machine for pp pe bottles

TONVA Plastic Machine Co.,Ltd was established in 1993,we are specializing in extrusion blow molding machine,pet stretch blow molding machine,molds and auxiliary machine.

Brief Introduction:

1) Smart series double station blow molding machine is TONVA company's original design,it's combines bydraulic and pneumatic.

2) The performance is well and running stable,it's easy to operater.The sal;es is hundreds and it's mature design in company.

3) Suitable from 5ml to 5L.

4) Suitable for drug bottle,washing bottle,oil bottle,plastic toy,beverage bottle,drill box etc.

SMART SERIES Of 5L Pneumatic System Extrusion Blow Molding Machine 

TVD-5L Basic Specification:

* Double Station 
* 80mm screw / 22kw motor;
* PE etc material;
* Automatic Trimming: Neck/Bottom/Handle/Slides;
* Die-heads for choosing:
   Single die-head(2L to 5L) ---at 180pcs per hour;

   Double die-heads(1.5L to 2L)---at 600pcs per hour;

   Triple die-heads(500ML to 1.5L)---at 900pcs per hour;

   Four die-heads(200ML to 500ML)---at 2000pcs per hour;

   Five die-heads(150ML-200ML)---at 3000pcs per hour;

   Six die-heads(up to 150ML)---at 2800pcs per hour;    

* Center distance:

   Six die-heads---60mm;Five die-heads---80mm;Four die-heads---100mm;Triple die-heads---120mm;Two die-heads---200mm;

TVD-5L Working Condition:
* Power supply: 380VAC/50Hz (depending on client's country)
* Water Cooling: 20℃(5HP Water chiller)
* Air source: 0.6Mpa, 1.0m³/min (1.0 m³/min air compressor)