Slim 12V/10A 18000 mAh jump starter for petrol and diesel car rechargeable power bank

Slim 12V/10A 18000 mAh rechargeable power bank

The top features of the ( Diesel& Petrol ) rechargeable power bank :

²  Big Capacity ( Nano Lithium Polymer): 18000mAh

²  Mini Body & Ultra-light weight: Around 1KG ( Replace the Traditional Heavy Ones)

²  Easy to take. Convenient portable safety device.

²  Fantastic Ability: Start Both Any Petrol vehicles and Diesel Engine Vehicles.

²  Super cold-resistant: Extreme Cold: -30℃ ( Good to Russia)

²  Super cycle-times :>1000times

²  Super Peaking Current:600A

²  Long-Time life cycle: 3-5 years

²  Short Charging Time: 3-6 hours with low self-discharge cycle.

²  LED Light: Light Illumination; Emergency flashlight with SOS signal.

²  Ultra-Thin: 27mm 

Parameter for rechargeable power bank :

Accessories for rechargeable power bank :

Another Accessories for Choosing:

Cigar Socket Cable                                                                         4-1 Cellphhone/ Tablet Connectors

Function for rechargeable power bank :

1. Jump Start 12V Vehicles( Petrol and Diesel Vehicles are Both OK to Jump Start).

2. 5V/1A & 5V/2A USB Output ----Ensure your cellphone/5V device always powerful.

3. 12V/10A Output-------Always be powerful for your 12V numerous Electronic Device, Such as Car Cooler.

4. 19V/3.5A Output------Charger for your Laptop

5. LED illumination----No worry no lighting around you anytime.

With Smart Clamps to Jump Start, the features are as following:

1. Anti reverse protection.

2. Anti- low pressure protection. 

3. Short circuit proof protection.

4. Anti over discharge protection.

5. Anti reverse charging protection.  

6. Test the battery iteself.

Packing Set for rechargeable power bank :

 Instruction for rechargeable power bank 1. Make sure that the number of indicators is not less than 3 ones. ( According to our testing experience, 

  even the indicators are 3 lights on, it can jump start the cars at least 5 time, but we still don’t suggestion,

  since it hurt the master much) 

2. Plug the cord of jumper cable into the jump start socket.

3. Connect the RED clamp to the vehicle's battery positive (+) terminal and,

    connect the BLACK clamp to the vehicle's battery negative (-) terminal.

4. Start the vehicle.

5. After the vehicles started, please take the jump clamps off from the  Epower master 

    and please don’t disconnect the Red and Black clamps to the car battery in 30seconds again!

Troubleshoot Features: The Green Light on means the battery of cars is no problem!

Testing Pictures: