New Arrival Slim Multi-Function 12V 18000mAh Jump Starter car starter

New Arrival Slim Multi-Function 12V 18000mAh  Jump Starter  car starter  

The top features of the ( Diesel& Petrol )  Jump Starter Pack :

²  Big Capacity ( Nano Lithium Polymer): 18000mAh

²  Mini Body & Ultra-light weight: Around 1KG ( Replace the Traditional Heavy Ones)

²  Easy to take. Convenient portable safety device.

²  Fantastic Ability: Start Both Any Petrol vehicles and Diesel Engine Vehicles.

²  Super cold-resistant: Extreme Cold: -30℃ ( Good to Russia)

²  Super cycle-times :>1000times

²  Super Peaking Current:600A

²  Long-Time life cycle: 3-5 years

²  Short Charging Time: 3-6 hours with low self-discharge cycle.

²  LED Light: Light Illumination; Emergency flashlight with SOS signal.

²  Ultra-Thin: 27mm 

Parameter for Jump Starter car starter :

Accessories for Jump Starter car starter :

Another Accessories for Choosing:

Cigar Socket Cable                                                                         4-1 Cellphhone/ Tablet Connectors

Function for Jump Starter car starter :

1. Jump Start 12V Vehicles( Petrol and Diesel Vehicles are Both OK to Jump Start).

2. 5V/1A & 5V/2A USB Output ----Ensure your cellphone/5V device always powerful.

3. 12V/10A Output-------Always be powerful for your 12V numerous Electronic Device, Such as Car Cooler.

4. 19V/3.5A Output------Charger for your Laptop

5. LED illumination----No worry no lighting around you anytime.

With Smart Clamps to Jump Start, the features are as following:

1. Anti reverse protection.

2. Anti- low pressure protection. 

3. Short circuit proof protection.

4. Anti over discharge protection.

5. Anti reverse charging protection.  

6. Test the battery iteself.

Packing Set for car starter :

 Instruction for 12V Jump Starter car starter 1. Make sure that the number of indicators is not less than 3 ones. ( According to our testing experience, 

  even the indicators are 3 lights on, it can jump start the cars at least 5 time, but we still don’t suggestion,

  since it hurt the master much) 

2. Plug the cord of jumper cable into the jump start socket.

3. Connect the RED clamp to the vehicle's battery positive (+) terminal and,

    connect the BLACK clamp to the vehicle's battery negative (-) terminal.

4. Start the vehicle.

5. After the vehicles started, please take the jump clamps off from the  Epower master 

    and please don’t disconnect the Red and Black clamps to the car battery in 30seconds again!

Troubleshoot Features: The Green Light on means the battery of cars is no problem!

Testing Pictures: