L/B corner bead and plaster stopping angle

Specifications

1.flange corner bead
g size:30-70mm
3.length:1-3m
4.surfacetreatment:hot galvanized
5.free sample

flange corner bead

 

An expanded flange corner bead with extra long expanded flange. It has a steel rib running the length of the bead to provide nail holes and extra rigidity. The Materials of Angle Bead:Galvanized Steel, Aluminium, Stainless Steel, Zinc (99% pure zinc) Alloy 
Angle Bead: Specifications 
The angle bead with creased reinforce flange providing straight corners with wave margin and nail hole. Used over irregular surfaces. Plaster keys near nose for reinforcement where needed most

 

The small angle bead with flat reinforce flange providing straight corners with flat margin and nail hole. Used over irregular surfaces. Plaster keys near nose for reinforcement where needed most

 

 

How to make use the angle bead

 

1.If the building is less than 2 meters above the ground, we can construct by level bar;
2.If more than 2 meters, we need to construct threaddrawing;
3.No construction if it rains.

2.We need to fix the Angle bead strip on the wall after covering cement mortar of 4-6mm on the finishing wall. Pressed the wall and make the cement mortar flow out of the meshes.

3.12 houres later, we can carry out next working procedure in order to prevent the cement mortar shifting or being out of shape beforecongealling.

4.We need to arrange people to paste the Angle bead(The Angle bead strip should be verticlly fixed full of cement mortar). Perpendicularity error should be within 2mm and it should be seriously operated. Sizes can be cut by your needs.

 

 

 

 

 

If any of the products can meet your require, please contact me without hesitate!
High quality and best price will be offered!