Stainless Steel Standard sand Test Sieve

Specifications

Stainless Steel Standard sand Test Sieve
Stainless steel
Screen using for filter
Plain weaving
Bright colour

Stainless Steel Standard sand Test Sieve

 

Frames of seamless spun brass with rolled edges and stainless steel mesh. Extended bottoms fit all frames, pans or separator bottoms of the same diameter so a set of sieves can be stacked.

 

Material:  stainless steel, brass and G.I Frames.

Frame: a rigid sidewall used to form the body of the testing sieve. Common depths are 50.8 mm (2"  full height)  for 8” sieves and 25.4 mm (1" half height).
Special  application sieves  of other depths are also in use. 
Mesh:  screening  medium with openings of uniform size  and shape made of woven, punched or electrodeposited material. 
Pan:  stamped or spun receiver of materials passing through the finest sieve. 

Skirt: section of test sieve below the sieve mesh that allows for mating or nesting of the sieves in a test stack.

 

Mesh	Wire Dia(mm)	Opening(mm)	Material(AISI)
2mesh*2mesh	1.8	10.9	304 or 316
3mesh*3mesh	1.5	6.96	304 or 316
4mesh*4mesh	1	5.35	304 or 316
7mesh*7mesh	1	2.63	304 or 316
10mesh*10mesh	0.6	1.94	304 or 316
12mesh*12mesh	0.5	1.62	304 or 316
16mesh*16mesh	0.4	1.19	304 or 316
16mesh*16mesh	0.35	1.24	304 or 316
18mesh*18mesh	0.35	1.06	304 or 316
20mesh*20mesh	0.4	0.87	304 or 316
24mesh*24mesh	0.26	0.8	304 or 316
30mesh*30mesh	0.3	0.55	304 or 316
35mesh*35mesh	0.17	0.56	304 or 316
40mesh*40mesh	0.23	0.4	304 or 316
50mesh*50mesh	0.2	0.31	304 or 316
60mesh*60mesh	0.15	0.27	304 or 316
70mesh*70mesh	0.12	0.24	304 or 316
80mesh*80mesh	0.13	0.19	304 or 316
90mesh*90mesh	0.1	0.16	304 or 316
100mesh*100mesh	0.09	0.15	304 or 316
120mesh*120mesh	0.063	0.12	304 or 316
150mesh*150mesh	0.053	0.11	304 or 316
180mesh*180mesh	0.053	0.09	304 or 316
200mesh*200mesh	0.04	0.07	304 or 316
250mesh*250mesh	0.04	0.063	316
300mesh*300mesh	0.04	0.044	316
325mesh*325mesh	0.035	0.043	316L
350mesh*350mesh	0.03	0.042	316L
400mesh*400mesh	0.03	0.33	316L
450mesh*450mesh	0.028	0.028	316L
500mesh*500mesh	0.025	0.026	316L

 

Application:  In petroleum, chemical industry, cement, ceramics, pharmacy, metering, etc.

Each test sieve is supplied with a Serial Number and matching Test Sieve Certificate of Compliance.

 

Features:  The frame of testing sieve is made of SUS 304# stainless steel, the thickness is 0.6 mm, firm and durable, no magnetism.
Sieve and frame are soldered all around, then make a mosaic base, as the frame is two-double, so that the testing sieve is more firm and durable.