Contact Platform Support
Help CenterPVC Plastic Pipe Extrusion Production Line
Related Products
-
PVC Plastic WPC Hot Cutting Pelletizing LineNegotiableMOQ: 1 Set -
Excellent PVC Profile Extruder MachineUS$ 30,000 - 100,000MOQ: 1 Set
-
PET Strap Producing LineUS$ 89,000 - 200,000MOQ: 1 Set
-
Low Price and High Quality U-PVC Pipe Production LineUS$ 80,000 - 160,000MOQ: 1 Set
-
PP-R Pipe Extrusion Production MachineNegotiableMOQ: 1 Set
Application of Our PVC Pipe Extrusion Line
This PVC pipe production line is mainly used to produce U-PVC/C-PVC pipes of water supply and water drainage. This line consists of conical twin screw extruder, vacuum calibration table, haul off machine, pipe cutting machine and stacker.
Why Choose from Lanhang
1. Since1992, with more than 20 years' professional experience
2. Overseas service center available (in Europe, Japan, Dubai, etc.)
3. International CE, SGS, IAF, CNAS certification
4. National high-tech enterprise / products
5. Various National Patent for Inventions Letters for rubber & plastic machinery
6. ISO9001:2008 management
Main Parameters:
ProjectModel |
GF-50 |
GF-110 |
GF-160 |
GF-250 |
GF-400 |
GF-630 |
Extruder |
SJSZ-51 |
SJSZ-65 |
SJSZ-65 |
SJSZ-65 |
SJSZ-80 |
SJSZ-92 |
Pipe diameter range(mm) |
16-40 |
50-110 |
63-160 |
110-250 |
200-400 |
315-630 |
Haul-off speed(m/min) |
3-12 |
2-8 |
2-8 |
0.4-3 |
0.4-3 |
0.4-3 |
Total power(kw) |
62 |
66 |
89 |
95 |
135 |
255 |
Total length(mm) |
17000 |
18000 |
20000 |
20500 |
28000 |
30000 |
FHigh extrusion capacity, low melt temperature.
FSpecial screw design insure the high-efficiency and high yield
FBevel gear design of high hardness and low noise brings ependable performance with oong service life.
FAdoption direct current speed regulation design for the standard, also the frequency variable speed adjusting and the electromagnetism speed adjust may be chosen.
Die and Calibretor
¨ The sizing sleeve carries precooking equipment at its entrance is applicable to super-speed extrusion.
¨ On the front end of butterfly type sizing sleeve carrying entrance water curtain there is a closed inside room, which is applicable to the small diameter tube extrusion specially.
¨ Detained time on section of fluid divide body distributes even.
The vacuum water cooling tank
* The tank body made by stainless steel.
* Lengthways move by motor regulating.
* There-dimensional adjusting
* Have the high and low water level control device
* The water pump of high power and spraying head of special design bring high efficient spraying cooling.
Haul off device
² Double, three, four or six pedrails hauling machine
² Changing frequency speed adjusting system guarantee synchronous hauling off.
² By proportion valve and gas pressure control to regulate precisely contact pressure
² By the cenral motor drives all pedrail to attain highly synchronous result.
- Have the set dimension and automatic cut function
- Following cut and complete synchronous.
- Low noise and high protection design.
Our Certificates:
We are at your service!
Send Inquiry to This Supplier
You May Also Like
-
Candy Cane Plastic Extruder for Crafting Christmas Decorations and Sweets DisplaysUS$ 100000.00MOQ: 1 Set
-
Meltblown PP Non-Woven Fabric Making Machine for Face Mask N95 Medical MaskNegotiableMOQ: 1
-
PVC Monofilament Extruding Line(Used), Monofilament Machine, Monofilament EquipmentUS$ 8 - 10MOQ: 1 Piece
-
Production Line Used for Granules Powder Material FeederUS$ 650 - 800MOQ: 1 Set
-
TZ Brand Plastic Filament Extruding MachineNegotiableMOQ: 1 Set
-
Mono Layer Extrusion Air Bubble Film Extrusion LineryUS$ 20,000 - 60,000MOQ: 1 Set
-
LIANJI Plastic Extrusion Blow Molding MachineUS$ 99 - 199MOQ: 1 Set
-
PP/HDPE Flat Yarn Making Machines for Woven Bag/Cement Bag/Container Bag PlantsUS$ 8,500 - 8,500MOQ: 1 Set
-
Chinese Waste Plastic Board Recycling MachineUS$ 40,000 - 48,000MOQ: 1 Set
-
The Waste Tire Recycling Production Line With CE ISO SGSUS$ 20,000 - 80,000MOQ: 1 Set
