Home > Products > Energy recovery ventilator > Alto ERV-400 heat recovery system Energyrecovery ventilation unit 236cfm heat recovery
Alto ERV-400 heat recovery system Energyrecovery ventilation unit 236cfm heat recovery
- 500 Unit / Units per Month
- Shenzhen Guangzhou
- T/T L/C D/P D/A Credit Card PayPal
- Vibration Absorber, Eliminator Shock Absorber, refrigeration part, air conditioner part
- AC motor start capacitor, compressor capacitor, refrigeration capacitor
- Quick coupler QC-LM QC-HM, refrigeration part
- Quick coupler QC-L QC-H, refrigeration part
- Quick coupler QC-15AL QC-15AH, refrigeration part
- Quick coupler QC-12L QC-12H, refrigeration part QC-12L/H
Product Details
Place of Origin: | Guangdong, China | Brand Name: | Alto | Model Number: | ERV-400 |
Type: | Other, Ventilation, Energy recovery ventilator |
Product Description
♦ Use For
• House
• Conference
• Laboratory
• Office
• Machinery room
• Gymnasium
♦ Functions
Air purification, energy recovery, bypass system, two directions of ventilation etc.
♦ Specification
Model | ERV-400 |
Air flow (m3/h) | 400 |
Static pressure (Pa) | 100 |
Power (w) | 200 |
Cooling enthalpy rate | 56 |
Heating enthalpy rate | 56 |
Unit dimension (mm) | 744*804*270 |
♦ Features
• High efficiency energy recovery
Capability strengthen over 20% base on special phase membrane
• Low cost develop
The cost low over 20% base on chinese equipment with our technologh, the cost lower 60% than importing.
• Nanometre safety micropore
Nanometre safety micropore put an end to over 2.5nm bacilli and virus to intrude.
• No touch dirt tech
Special no touch dirt tech can depress air resistance. Keep high efficiency. Good prevent mildewed etc.
• No pollution
Large surface area and stagger passages for heat transfer, which prevent cross-infection.
◊ ALTO Ventilator Production Procedure
♦ Quality & Certificate
♦ Packing
1. Dust Proof Film + Anti-collision Foam + 5 Layer Cartons + Ply-wooded Case (For LCL only, no need fumigation).
2. Customized packing is available.
3. We are always working hard on the most reliable packing in order to help you get the Perfect products.
♦ Shipping
1. Express delivery
2. Air flight
3. Sea shipment
A. Order service
INQUIRY - QUOTATION - AGREEMENT - ORDER CONFIRM - PROFORMA INOICE - DEPOSIT PAYMENT - PRODUCTION - BALANCE PAYMENT - DELIVERY - DOCUMENTS DESPATCH - GOODS COLLECTION - INSTALLATION - OPERATION - FEED BACK.
1, We are ready to serve you 24 Hours A Day 7 Days A Week!
2, We offer you our product catalogue, specification, prices, and other information according to your inquiry.
3, We issue you the proforma invoice after you confirm the order model, quantity and other requirements.
4, We start to work on your order after the payment.
5, We produce your goods and test them 100% in the test room , and all products will be double checked by leakage detector before loading.
6, We pack the goods carefully with the best materials and arrange the goods delivery to you according to your requirement.
7, We send you the invoice, packing list, bill of lading and other shipping documents for you to collect the goods.
B. Payment service
1, T/T
2, L/C (for container order only)
3, O/A (for reliable buyer only)
4, Western Union,Paypal, Escrew (for sample order & parts)
C. Technical service
1, We calculate the capacity and recommend the best models.
2, We design and develop the new products according to your requirement besides our standard products.
3, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
4, We supply the spare parts and technical support in & after the warranty time.
5, We supply the training course to your workers at our factory if you need.
D. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
4, Update you the latest products information and price adjustment every year.
5, Old customer discount will be available when you order the products again.
E. Customized service
1, OEM service
2, ODM service
3, New product R&D service
4, CKD & SKD
1. What is your product range?
1) Dehumidifier for swimming pool.
2) Heat pump for swimming pool.
3) Heat pump for house use.
4) Air cooled chiller.
5) Energy/heat recovery ventilator.
6) Customized refrigeration & ventilation products.
2. What advantages do you have?
1) More than 10 years experience on refrigeration products.
2) Strict QC control system for perfect production direction.
3) Strong Research and Development ability for new products.
4) Complete equipment and facilities offer large production capacity.
5) Take care service from the sales to technician offer reliable support.
3. How about the product quality?
1) Our products are designed and produced completely according to European standard, which are oriented as high efficiency and high quality.
2) We have applied the CE, CB & ROHS certificate for our products and get the good technical test report from the Intertek, who is the international famous third party test institute.
3) All our products will be tested 100% during production and will be double checked by leakage detector before loading.
4, How does the air source heat pump work?
Air source heat pumps deliver heat at lower temperatures over long periods than conventional boilers. They transfer the heat energy from the ambient air to supply the room heating, air conditioning and domestic use hot water by the refrigeration cycle. They may need to be left on all day and night during the winter in order to heat your home efficiently, the control system will do this automatically and there will be no need for manual intervention.
5, What is the lowest outside operational temperature limit?
The Heat Pumps can normally operate as low as -15°c, and the heat pumps equipped with the EVI compressor can even operate until ~-25°c. They will not stop working and will continue to provide hot water but as temperatures drop so will the efficiency, in severe weather conditions and at a predetermined point the back-up heater or secondary boiler will generate additional heating capacity to maintain the required temperature.
6, Can Heat Pumps be installed with my existing radiators?
Yes, in many cases, existing radiators which were sized for 65 – 70°c water are heavily over-sized and can be used with a lower water temperature, particularly if the property has had insulation improvements such as double glazing, loft and cavity wall insulation. It may be necessary to fit additional or larger, newer radiators in some cases.
7, Can an air source heat pump be used in conjunction with other technologies?
Yes, with suitable control systems, air source heat pumps can be operated to act in either a lead or support mode with any other fossil or renewable heating technology. This needs to be highlighted at the survey and built into the specification particularly where solar thermal is already installed. If solar PV panels are installed this can make an ideal package by producing cheap electricity and using it to heat your home with and Air Source Heat Pump.
8, What are the main operation functions on the controller?
The controller has several levels, and many settings are set by the installer to match the heating needs of your property. The main user settings are for the householder is: on/off, space heating operation, water heating operation, schedule timer programming and room temperature. Additional room thermostats can be added in some installations
9, Are Heat Pumps easy to service and maintain?
Once fitted you can virtually forget about an air source heat pump because the technology is so intelligent that minimal maintenance is required; fit and forget! There are no burners and no flues to maintain and the refrigeration gases and compressor are in a sealed system.
10, How long will a heat pump last?
Most manufacturers are stating 15 years for an Air Source system. As they are usually exposed to the elements this may vary depending on their location but are certainly expected to have a longer life than the gas boilers.
MAIN PRODUCTS
Pool heat pump | House heat pump | Air cooled chiller | Dehumidifier | Water fan coil |
Contact Us
- Alto Refrigeration Manufacturing Co., Ltd.
- Contact nameLori Xu
- Phone86-757-86228183
- AddressNo.5 Changling Industrial Estate, Guanhe Road, Guanyao, Nanhai Foshan,Guangdong
- Rubber charging hose adapters, manifold hose adapter CT-138 / CH-138, refrigeration hose, air conditioner hose
- Rubber charging hose adapters, manifold hose adapter CT-135 / CH-135, refrigeration hose, air conditioner hose
- Copper filter drier with copper tube, refrigerator part, fridge filter drier, copper filter drier
- Copper filter drier with copper capillary tube, refrigerator accumulator, fridge accumulator, copper filter drier
- Copper filter drier with brass nut, refrigerator accumulator, fridge accumulator, copper filter drier
- Copper accumulator, refrigerator accumulator, fridge accumulator, copper filter drier
- Tee type access valve, brass valve, service valve
- Brass Union, brass fitting, HVAC/R union
- 2 Way & 3 Way Air Conditioner Split Valve A/C Split Valve Service Valve brass valve
- Flare Sight glass, Brass Moisture Indicator, brass sight glass for air conditioner
- Sight glass with brass nut, Brass Moisture Indicator, brass sight glass for air conditioner
- Brass SAE&NPT union, brass union, brass fitting
Popular Searches
Recommended Products
- Symons Steel-Ply Forming System Formwork for Concrete Construction
- TGGS75-400HDPE Plastic Geogrid Room Large Government Project River Maintenance and Reinforcement
- TGGS75-400HDPE Plastic Geogrid Room Large Government Project Parking Lot Roadbed Reinforcement
- TGGS75-400HDPE Plastic Geogrid Room Large Government Project Roadbed Laying and Reinforcement
- osha standard lvl scaffolding plank for Saudi Arabic Market
- HDPE plastic blind ditch 160mm, 200mm, 400mm landfill engineering seepage and drainage
- 2.20mm thick HDPE anti-seepage geotextile membrane with smooth surface inside the cement wastewater sedimentation tank liner
- Waste disposal site engineering anti-seepage 1.50mm thick HDPE geomembrane 8m wide smooth surface
- Root puncture resistant HDPE polyethylene geotextile waterproof membrane with a 1.25mm thick smooth surface
- HDPE rough geomembrane, 8 meters wide and 2.0mm thick landfill liner
- big size film faced plywood
- 100% birch plywood
Find Similar Products By Category
- Construction & Real Estate > HVAC Systems & Parts
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Lori Xu
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-