hot dipped galvanized steel wire for acsr

Hot Dip Galvanized Steel Wire for ASCR

1.Material: 45,65,70, 72A, 72B, 82B, 65Mn

2. Surface Coating: Hot dipped galvanized

3. Characteristic: High tensile strength,small tolerance

                              Shiny surface, good corrosion prevention
4. Packing type:Spool; Coil

5. Application: Being used for stranded conductors in overhead power circuitry
6. Remarks during use and handling:
a. During transportation, handle softly and carefully, avoid bumping and damaging the steel wires. Moisture and rain prohibited. Steel wires must be stored in dry and well ventilated indoors
b. Pay attention to the direction of steel wires when paying-off. Be sure the spools or coilis rotationg freely as to achieve identical tension of all the steel wires

c.  In case of batch usage, the remaining should be repacked to avoid oxidizing of the surface to guarantee coating   

Technical parameters
Wire dia: 1.24-5.5mm; Tensile Strength:1340~1290Mpa 

 NOTE:Providing engineer design as per customer's request.

Factory picture: