Contact Platform Support
Help CenterVIET NAM CACO3 FILLER MASTERBATCH FACTORY
Related Products
-
Factory Directly Supply Caco3 Filler Masterbatch for PE Film/ PP Injection Product /high Quality MasterbatchUS$ 455 - 555MOQ: 1 Metric Ton -
Masterbatch Use for Plastic IndustriesUS$ 455 - 555MOQ: 1 Metric Ton
-
CompoundUS$ 455 - 555MOQ: 1 Metric Ton
-
AN PHAT CACO3 FILLER MASTERBATCH FACTORYUS$ 455 - 555MOQ: 1 Metric Ton
-
COMPOUND FOR PLASTIC PP INJECTION FACTORYUS$ 455 - 555MOQ: 1 Metric Ton
Specifications
AN PHAT CACO3 FILLER MASTERBATCH FACTORY WITH SKILLED TECHNICAL TEAM- LOGISTIC TEAM- DOCUMENT TEAMAN PHAT PLASTIC VIET NAM
AN PHAT CACO3 FILLER MASTERBATCH FOR PE FILM
Item |
Test Method |
Unit |
Result |
Plastic content |
Ash tester |
% |
20 ± 0.5 |
CaCO3 content |
Ash tester |
% |
80 ± 0.5 |
Density |
ASTM D1506 |
g/cm3 |
1.8 |
Moisture |
IR |
% |
≤0.15 |
Particle size |
Caliper |
mm |
1.5 ±0.5 ( CUSTOMER REQUIRE) |
Appearance |
|
|
White Oval |
PRODUCT ADVANCED CHARACTERISTICS
1. This product should be keep out of moisture damp before using;
2. The well mixed masterbatch raw materials and plastic must be used up within 10 hours, otherwise, the dehydration master-batch may lose efficiency because of absorbing the moisture in the air, and it is likely to cause the phenomenon of plugging the filter.
3. As for raw materials with large contents of water, the increase of amount is not recommended, because it may reduce the mechanical properties of the products, we recommend appropriate dry treatment;
4. It is no allowed to carry out dry treatment to the raw materials together with the plastic dehydration master- batch;
5. Before using, check packaging to make sure it is intact or not, unused plastic dehydration master-batch should be heat sealed as soon as possible.
PRODUCT ADVANCED CHARACTERISTICS
1. Improve the anti-heating, rigidity and tightness property.
2. Remove the surface light from plastic products, to get sub-light effect.
3. Improve the surface antifriction and antislip property of plastic products.
4. Reduce shrinkage ratio of final products to Improve stability that size.
5. Reduce fire heating quantity of plastic products second to reduce pollution.
6. Improve surface printing property of plastic to reduce needed electric current under surface corona process.
7. Provide breathe free to film products.
8. Improve heat-conduction property of plastic molding material to reduce period.
9. Reduce the application ratio of white color masterbatch
We are exporters of high reputation and have been for 11 years in the chemical line.So we are in a good position to serve our customers with the most reliable quality of the line you suggested.
The products have good dispersing and heat resistance,
Also we can make the special goods under CUSTOMER'S requirements.
Send Inquiry to This Supplier
You May Also Like
-
PTFE Suspension Molding Powder Resin 20-40μmUS$ 10 - 30MOQ: 100 Kilograms
-
Ultra-High Flow TARFLON PC Resin Pellets With Excellent Heat Resistance for Injection MoldingNegotiableMOQ: 25 Kilograms
-
Economic Interlocking Horse and Cow Stable Mat Made of Rubber or EVAUS$ 13.5 - 35.4MOQ: 100 Pieces
-
SAP Super Absorbent Polymer for Sanitary Napkins or DiapersUS$ 1.5 - 2MOQ: 1000 Kilograms
-
Slip Additive Masterbatch With PE CarrierUS$ 2.3 - 2.5MOQ: 500 Kilograms
-
UHMW PE Powder for Lead-acid Battery SeparatorUS$ 2,750 - 2,850MOQ: 1 Ton
-
Pet Flakes Hot Wash / Pet Flakes Chip / Hot Washed Pet FlakesUS$ 650 - 680MOQ: 22 Tons
-
PP/ HDPE/ LLDPE VIRGIN & RECYCLED, PE, PPCNegotiableMOQ: 25 Metric Tons
-
Water Treatment Polymer Anionic Polyacrylamide Flocculant (pam)US$ 1,000 - 3,000MOQ: 1 Metric Ton
-
Professional Top Quality Low Price PET Pacher ManufacturerUS$ 0.01 - 0.5MOQ: 2000 Pieces
