Contact Platform Support
Help CenterCompound
Related Products
-
AN PHAT CACO3 FILLER MASTERBATCH FACTORYUS$ 455 - 555MOQ: 1 Metric Ton -
COMPOUND FOR PLASTIC PP INJECTION FACTORYUS$ 455 - 555MOQ: 1 Metric Ton
-
VIET NAM CACO3 FILLER MASTERBATCH FACTORYUS$ 455 - 555MOQ: 1 Metric Ton
-
TOTALLY VIRGIN POLYMER CACO3 FILLER MASTERBATCH USE FOR PLASTIC BAG APPLICATIONUS$ 455 - 555MOQ: 1 Metric Ton
-
Viet Nam Caco3 CompoundUS$ 455 - 555MOQ: 1 Metric Ton
Specifications
High Quality compound use for plastic industries produced under high tech system, with high technical skilled team
AN PHAT CACO3 FILLER MASTERBATCH FOR PE FILM
Item |
Test Method |
Unit |
Result |
Plastic content |
Ash tester |
% |
20 ± 0.5 |
CaCO3 content |
Ash tester |
% |
80 ± 0.5 |
Density |
ASTM D1506 |
g/cm3 |
1.8 |
Moisture |
IR |
% |
≤0.15 |
Particle size |
Caliper |
mm |
1.5 ±0.5 ( CUSTOMER REQUIRE) |
Appearance |
|
|
White Oval |
PRODUCT ADVANCED CHARACTERISTICS
1. This product should be keep out of moisture damp before using;
2. The well mixed masterbatch raw materials and plastic must be used up within 10 hours, otherwise, the dehydration master-batch may lose efficiency because of absorbing the moisture in the air, and it is likely to cause the phenomenon of plugging the filter.
3. As for raw materials with large contents of water, the increase of amount is not recommended, because it may reduce the mechanical properties of the products, we recommend appropriate dry treatment;
4. It is no allowed to carry out dry treatment to the raw materials together with the plastic dehydration master- batch;
5. Before using, check packaging to make sure it is intact or not, unused plastic dehydration master-batch should be heat sealed as soon as possible.
PRODUCT ADVANCED CHARACTERISTICS
1. Improve the anti-heating, rigidity and tightness property.
2. Remove the surface light from plastic products, to get sub-light effect.
3. Improve the surface antifriction and antislip property of plastic products.
4. Reduce shrinkage ratio of final products to Improve stability that size.
5. Reduce fire heating quantity of plastic products second to reduce pollution.
6. Improve surface printing property of plastic to reduce needed electric current under surface corona process.
7. Provide breathe free to film products.
8. Improve heat-conduction property of plastic molding material to reduce period.
9. Reduce the application ratio of white color masterbatch
1.Package, Transportation and Storage
- Packing: 25kg/ bag.
- Note to avoid moisture, isolation and breakage in transportation
- The product is sensitive to moisture. No problem to store in original packing bags. Make sure to use product immediately after opening the packing bags. If it has moisture problem, dry it by hot air recycle machine under 90oC for 30 minutes
2. Shipping:
Within 5-7 days after confirmed deposit or L/C.
We are exporters of high reputation and have been for 11 years in the chemical line.So we are in a good position to serve our customers with the most reliable quality of the line you suggested.
The products have good dispersing and heat resistance,
Also we can make the special goods under CUSTOMER'S requirements.
Send Inquiry to This Supplier
You May Also Like
-
Covestro Makrolon PC 2805 General Purpose Injection Molding ResinUS$ 1 - 1.02MOQ: 1 Kilogram
-
DuPont 988PA High Performance Virgin PA66 Nylon 66 ResinNegotiableMOQ: 1 Kilogram
-
VALOX™ 357U Resin SABIC Innovative Plastics for Industrial ApplicationsNegotiableMOQ: 25 Kilograms
-
Customizable PVC Plastisol Sofubi Toy for Collectors and RetailersNegotiableMOQ: 500 Kilograms
-
Polymers & ResinsNegotiableMOQ: 2000 Bags
-
Economic Interlocking Horse and Cow Stable Mat Made of Rubber or EVAUS$ 13.5 - 35.4MOQ: 100 Pieces
-
SAP Super Absorbent Polymer for Sanitary Napkins or DiapersUS$ 1.5 - 2MOQ: 1000 Kilograms
-
Slip Additive Masterbatch With PE CarrierUS$ 2.3 - 2.5MOQ: 500 Kilograms
-
UHMW PE Powder for Lead-acid Battery SeparatorUS$ 2,750 - 2,850MOQ: 1 Ton
-
Pet Flakes Hot Wash / Pet Flakes Chip / Hot Washed Pet FlakesUS$ 650 - 680MOQ: 22 Tons
