Home > Products > Reactive Power Compensation Panel > 400V 50Hz 150kvar-2400kvar SCR high-speed kvar power capacitor bank
400V 50Hz 150kvar-2400kvar SCR high-speed kvar power capacitor bank
- 30 Set / Sets per Month
- Qingdao
- T/T D/P D/A
Product Details
Place of Origin: | Shandong, China | Brand Name: | Hoteam | Model Number: | HTEQ |
Product Description
Specifications
Reactive Power CompensationAdopt high speed noncontact switchgear
No inrush current impact
kvar power capacitor bank
power quality control
Introduction of working principle
Hoteam HTEQ series dynamic harmonic eliminated reactive power compensation equipment consists of detection unit, main control unit, switch execution unit and tuning capacitor banks(including reactors), man-machine interface and other parts. Detection unit real-time detects system instantaneous voltage and current through voltage,current sensor, and real-time calculate system required reactive power,harmonic components,rms voltage and current, main control unit will complete logical judgment and send corresponding control order, to control switch execution unit to switch tuning capacitor banks, thus realize dynamic tracking compensation of load reactive power.
Main control unit contains advanced measuring and control system of zero transition process time, to ensure that input capacitor instantaneously at zero transition process, and naturally cut off capacitors at zero current time, switch process has no transient disturbance, avoided impact of inrush current and operating overvoltage, which guaranteed real-time of dynamic reactive power compensation, effectively reduced electrical stress impact from switch process to thyristor and capacitor,greatly improved reliability and service life of equipment.
Main characteristics of HTEQ product
• take microprocessor as detection and control core, real-time detect load reactive power, quickly calculate compensation capacity, realize fast judgment and control according to preset switch logic;
• use thyristor to constitute high speed non-contact switching switch, response timely and rapidly, high reliability, long service life;
• automatically follow and choose system zero transient process time to switch capacitor banks, transient process is very short, realize fast and dynamic compensation of reactive power;
• capacitor switch process has no impact of inrush current, no operating over-voltage, switch disturbance is small, capacity decay is small, low failure rate;
• dynamic response speed is less than 20ms, compensate the power factor to more than 0.95, and can effectively suppress voltage fluctuation caused by reactive power changes;
•contains harmonic suppress reactor, capacitor’s working stress is small, no dangerous of harmonic amplifier and resonance, can stably and reliably work in the power distribution system with higher harmonic content;
• capacitor switching control adopts working way of coding and cycle, switch is fast,accurate,and can further reduce capacitor’ work stress, fully extent life of capacitor;
• can realize split-phase dynamic compensation, apply to all kinds of unbalanced impact load;
• capacitor switching threshold and response time can be programmable, can realize convert of manual switch and automatic switch, commission and test are convenient, applicability is more widly;
• use multiple soft hardware anti-jamming measures, high anti-disturbance ability, reliable operation;
• has self-check function and over-voltage protection,over-current protection and others hardware protection functions, insure stable and reliable running of equipment;
• automatically detect system voltage, current, active power , reactive power, power factor before and after compensation;
• digital control and parameter set, LCD English display,RS485 port,standard MODBUS communication,computer remote monitor function, history event record function;
• can module parallel operation, easy
Main technical parameter
item | parameter |
Rating compensation capacity | 100 - 2400 kvar |
Supply voltage | Three phase 380V/690V±15% |
Supply frequence | 50/60Hz±2% |
Capacity of each step | 10—120 kvar |
Target power factor | 0.85~1.0(can set) |
Response time | 20ms—30s(according to requirement) |
Reactance ratio | 5%—14%(according to requirement) |
Power loss | Full load<1.5% rating compensation capacity |
Audio noise | ≤60 dB |
Protection function | Voltage abnormal protection;current abnormal protection;system fault protection;system over heat protection |
Dimension mm | 1000×1000×2200 standard MNS cabinet ×N |
Storage temperature | -40~85 °C |
Working temperature | -25~55 °C |
Relative humidity | ≤95%,non-condensate |
altitude | ≤2000m |
Contact Us
- Shandong Hoteam Technology Group Co., Ltd.
- Contact nametommy liu
- Phone86-0531-82670172
- AddressBldg. 6, No. 2600, Yingxiu Rd., High-Tech Development Zone
Active Harmnoic Filter | Modular type Active Power Filter | New Products | Reactive Power Compensation Panel |
- BENTLY 1900/65A-00-04-01-00-00 Device monitor
- ABB XVC768101 3BHB007211R101 power interface Module
- ABB LD800HSE communication interface module
- ABB UAC389AE02 HIEE300888R0002 Excitation control module
- ABB UAC383AE01 HIEE300890R0001 Control board
- ABB PPC907BE101 3BHE024577R0101 frequency converter
- GE ESP10B Flow and pressure controller
- GE ESM10A Ethernet communication module
- ABB DSAO120A 3BSE018293R1 Excitation conditioning
- ABB KSD211B 3BHE022455R1101 Coupling device unit
- HONEYWELL 05701-A-0302 Single channel control card
- ABB XVC768115 3BHB007211R115 Remote IO devices
- ABB XVC767AE105 3BHB007209R0105 Drive power module
- BENTLY 3500/22M 138607-02 Transient Data Interface Module
- ABB 5SHY5055L0002 3BHE019719R0101 GVC736BE101 Thyristor
- BENTLY 3500/42M 140734-02 Vibration monitoring system
- BENTLY 3500/32 125712-01 Four channel relay module
- BENTLY 3500/20 125744-02 condition monitor system
- ABB KUC755AE117 3BHB005243R0117 Excitation drive control module
- BENTLY 1900/65A-00-00-02-00-01 Vibration monitoring and analysis module
- VIBRO-METER 200-510-076-114 200-510-111-034 VM600 MPC4 Vibration monitoring instruments
- GE RS-FS-9001 362A1052P404 flame sensor Please contact me if you need product images
- KONGSBERG RMP201-8 sensor
- EMERSON MVME6100 single board computer
Popular Searches
- lightning conductor
- Copper Lightning Rod
- earthing system
- transmission rod
- 11 kv lightning arrester
- Copper Clad Steel Ground Rod
- static eliminator
- anti static device
- lightning connector
- plasma tv lift
- mtl safety barrier
- copper earthing bar
- copper earthing rods
- electrical earth rod
- earthing material
- Clad Steel Ground Rod
Recommended Products
- BENTLY 1900/65A-00-04-01-00-00 Device monitor
- ABB XVC768101 3BHB007211R101 power interface Module
- ABB LD800HSE communication interface module
- ABB UAC389AE02 HIEE300888R0002 Excitation control module
- ABB UAC383AE01 HIEE300890R0001 Control board
- ABB PPC907BE101 3BHE024577R0101 frequency converter
- GE ESP10B Flow and pressure controller
- GE ESM10A Ethernet communication module
- ABB DSAO120A 3BSE018293R1 Excitation conditioning
- ABB KSD211B 3BHE022455R1101 Coupling device unit
- HONEYWELL 05701-A-0302 Single channel control card
- ABB XVC768115 3BHB007211R115 Remote IO devices
Find Similar Products By Category
- Electrical Equipment & Supplies > Other Electrical Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
tommy liu
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-