GHL Series High Speed Wet Granulator Machine

Specifications

The powdery material and adhesive in a cylinder are mixed fully at the bottom to become humid soft material. Then it is cut by high-speed crusher and turns into uniform granules.Features: 1) The machine adapts horizontal cylinder structure2) Using air filled seal shaft to drive. 3) When washed, it can be changed to water4) Using fluidization to Granulate and the granule is near ball5) Its fluidity is good compared with the traditional process, 25% of adhesive can be saved and the drying time can be shorted6) The time of each mixing is 2 minutes and the time of granulating is 1~4 minutes7) Compared with the traditional process, 4~5 times of efficiency is raised by8) In the same sealed container, dry mixing, humidity mixing and granulating can be finished, in conformity with the requirements of GMP9) The whole operation has strict safe and protective measures10) The mixing and cutting speeds are controlled by changing frequency change, so the granules are more evenOther information is in the box below.