pipeline construction used tube bender 32" to 42".

Specifications

Deping Mechanical Equipment Manufactirer is a specialized pipeline construction equipment manufacture including pipe bender.

1,   Tube Bender Brief Introduction

The tube bender is used to bend pipe in pipeline construction .The bending mandrel is one of key parts of the tube bender, it is for purpose of preventing pipe inner wall from wrinking and controlling ovality during cold bending process of tube bender .

 

2,Technical Specifications  

 

Tube Bender
pipe-bending machine type	PBM0620	PBM1630	PBM2236	PBM3242	PBM3248	PBM4860
bending pipe diameter scope	168-508mm	406-762mm	559-914mm	711-1067mm	711-1219mm	1219-1524mm
apply to bending style	Applicable for screwed pipe, straight-side slot tube, seamless tube and steel tube with inner or outer erosion resistant coating, not spoiling steel tube erosion resistant coating.
operating temperature	-20°C~ +50“°C, relative humidity :≤ 85%
engine power	46KW	75KW	125KW	132KW	160KW	160KW
hydraulic system pressure	16MPa	16MPa	16MPa	16MPa	16MPa	21MPa
master hydraulic cylinder	2pieces 220× 350	2pieces 280×500	4pieces 320× 500	4pieces 360×500	4pieces 450×560	6pieces 360×560
lift hydraulic cylinder	2pcs 180×120	2pcs 200X200	4pcs 220x200	4pcs 250x200	4pcs 280x200	4pcs 280x200
hydraulic winch pull	1.5T	2.5T	7T	7T	8T	12T
track	Assembled track is fully sealed & self-lubricated and non- maintenance type, it is also work at frigid climate particularly. After stock for a long time, it still can be used immediately, no extra service is required.
complete machine size(mm)(length* width* height)	4450×2180×2175	6600×2650×2700	8400×3000×2800	8850×3180×3000	9800×3335×3235	main machine size: 9875× 3190×3500 hydraulic power unit 4300× 2280×2760
Total machine weight	about 8T	about 20T	about 42T	about 50T	about 68T	about 93T
each pipe bending machine need to work together with pipe bending mandrel and the bending die set (it includes the up set, the front clamp, the front bending set and the down bending set) which cooperated each other. Bending process for one single size of pipe need corresponding size mandrel and bending die sets.

 

 

3,Main Characteristics of Tube Bender

1. The pipe bending mandrel of  tube bender is wedge-form force transmission mechanism: powerful and reasonable distributed clamping force, intense self-locking function.

 

2. The tube benderis clamping cylinder inside placed: compact and reasonable structure, powerful clamping force.

 

3.Hydraulic motor travelling setting of the pipe bending machine : this setting is for walking function realization, working position can be controlled precisely by the control system.

 

4. The pipe bending mandrel of tube bender: Scale polyurethance clamping shoes ,reasonable design, easy for assembling and disassembling , high abrasive resistance.

 

4.Other Information of the Tube Bender

 

 

 

 

 

 

 

 

5,Contact Information

 

If you have any interests of the  tube bender or   other  pipeline construction equipment,you can contact me (Ms. Ivy ) through Alibaba or email me. I am here to give you the best service and high quality of the tube bender.

 

 

 

...