35mm cream tube with special screw cap and screen printing surface handing

 Dongguan Bi Rong Packaging Material Co., Ltd. was established in the year of 2008. We have focused on the plastic tubes for more than five years with well-equipped machinery and strong testing equipment. We can offer cosmetic plastic tubes as follows: mono-layer tube; double to five-layer tube, shapes from round, oval and more oval; diameters from 13 mm to 60 mm; capacities from 3ml to 400ml; custom length of tube sleeve (adjusted within the range of tube capacity); decorations up to offset printing, silkscreen printing, labeling and hot-stamping; colors from transparent, white to colored; finish in matte and gloss.  New mold service  is available for a new package development to meet customers‘ need.

Product Size and Specification

1. When the diameter is set, the tube length can be adjusted.
2. The chart is only for reference, and capacity and length can be customized along with the specific diameter of tube.
3. All the tube length refers to the testing result after sealing, if the customer need to seal tubes by himself, the tube length should be increased 10-20 mm.

Printing Area on Tube 

1.After producing, the printing area may shrink nearly 2.0% following production.
2.Standard size for sealing mark is 2.0mm * 7.0mm , also it can be customized.
3.It is 2.0mm for no printing area of tube shoulder and 5.0mm for no printing area of tube tail. They can be adjusted according to the requirement.