Audio Video Data Optical Transmitter
audio video data optical transmitter:
Name: Optical transmitter and receiver(8V+1D)Type: APT-201 8V+1DScale: Optical transmitter Single fiber 8-path single-direction video 1-path reverse-direction data digital
optical transmitter and receiver(8V+1D)
Specification
1. Fully data no condensation broadcast level transmit
2. No simulation frequency modulation, appearance modulation, amplitude modulation
optical transmitter's across modulation disturb.
3. Support any high exculpation rate video signal, auto compatible, PAL, NTSC, SECAM
audio system.
4. Support video no lose regeneration relay.
5. Support vidio, data, Ethernet, telephone sound side by side transmit
6. Gigabit fiber transmit technology, large capability, easy upgrade.
7. Fiber WDM/CWDM/DWDM technology.
8. Singlmode, multimode transmit distance 0-100M
9. Special ASIC design and high speed DSP technology
10. Advanced self-adapt technology, no have to adjust to use.
11. Fully surface adhibit technology
12. Industry level design, high dependability.
13. Independent module or rack mount style.
14. Support user handtailor and OEM.
Technical parameter
(Video interfaces)
1. Video input/output impedance
2. BNC 75ohm unbalanced interface
3. Video input/output voltage
4. Typical peal value 1Vpp, maximum 1.5 Vpp
5. Video bandwidth: 8MHZ
6. Video digital bit width: 8 bits/10 bits
7. Differential gain: <1%
8. Differentia phase: <0.6
9. Signal-to-noise ratio: 67 dB (weighting)
(Data interface)
1. Physicalinterface Shielding surpassing Cat. RJ-45 terminal, industrial wiring terminal
2. RS232 speed: DC-115. 2Kbps
3. RS-422/485 speed: DC-1.2Mbps
4. RS-422/485 distance: 0-1200m
5. RS-422/485protocol: Transparently compatible with RS-485/422 protocol Compatible
with I/O on-off volume, alarming data, Manchester Code.
(Ethernet interface)
1. Physical interface: Shielding surpassing-Cat.5 RJ-45 terminal
2. Supporting protocol: IEEE 802.3 10Base-T 10M, 10/100M Ethernet standards
3. Working mode: Full duplex or half duplex
(Phone interface)
1. Physicalinterface: Shielding Surpassing-Cat.5 RJ-45 terminal, industrial wiring terminal
2. Voice bandwidth: 4KHZ
3. Working mode: Peer-to-peer hot line, SPC exchange/separating unit mode
(Optical fiber )
1. Physical interface: FC/UPC, ST/UPC, SC/PC
2. Transmission speed: 155Mbps, 1.25Gbps
3. Optical fibertype: Singlemodo/multimode optical fiber
4. Transmission distance: Multimode: 0-3km;
5.Singlemode: 80km
6.Working temperature:-40~75degree
Send Inquiry to This Supplier
You May Also Like
-
Clean Room TelephoneUS$ 140 - 160MOQ: 1 Piece
-
Hot Sale Hdpe 40/33 Pipe for Fiber Optic CableUS$ 0.63 - 0.98MOQ: 30000 Meters
-
S42024-L5101-A120-02 Control Rectifier Switch Service BoardUS$ 100 - 3,000MOQ: 1 Piece
-
FC-FC Fiber Optic Patch CordUS$ 1.12 - 2.6MOQ: 10 Pieces
-
Cctv to ip Converter Cctv to tv ConverterUS$ 1 - 100MOQ: 1 Pair
-
Anritsu Site Master S331L PROMOTION PriceNegotiableMOQ: 1 Set
-
Strong Controllability 1310 Nm/1550 nm Wavelength FTTH Optical Receiver With Double WavelengthUS$ 10 - 50MOQ: 1 Set
-
Just for You Fiber Optics Light Up Paper Bag Vase, Paper Flower VaseNegotiableMOQ: 5000 Pieces
-
CYLINDRICAL MUTINATION PLUGSNegotiableMOQ: 1
-
USB AF-MINI USB 5P-B M Adapter VK2-0055NegotiableMOQ: 5000 Pieces