400C 25L Vacuum Oven With Quartz Window, Gas Flow-meter & Water Chiller

Specifications

Drying Ovens, Vacuum Drying Ovens
1.homogeneous temperature
2. easy to operate
3. factory price and fast delivery

400C 25L Vacuum Oven With Quartz Window, Gas Flow-meter & Water Chiller                                

dental furnace

Brief Introduction for Drying Oven:

 KJ-DR is a vacuum oven with 30 segments precise temperature controller upto 400°C. 

Radiant wall heating system is employed to provide optional temperature uniformity. 

Its 25 liters vacuumable SS chamber allows adequate space for drying, curing, vacuum 

embedding, and plating applications. A closeable  4"x4" quartz window is built on the 

front door to allow you observe samples inside clearly.

 

 

Technical Parameter for Drying Oven:

 

 

Chamber and Door	The chamber is structured by Stainless Steel (1Cr18Ni9Ti) Inner Chamber size: 300mm(L) x 300mm(W) x 280mm(H);  (12 x 12 x 11", 25 Liter) A good vacuum seal is achieved by silicone door gasket and  positive latch door 2 stainless steel shelves are included to facilitate processing  efficiency. A closeable 4"x4" quartz window is built on the front door  to allow you observe samples inside clearly, and keep charmber  temperature more uniform when close cover Door flange with water cooling jacket to allow silicone sealing  O-ring using for long tine
Working Voltage	208 - 240VAC (20Amps circuit breaker is required)
Power Consumption	1600 W
Recommended Heating Rates	5 ºC/min: 0ºC - 100ºC 5 ºC/min: 100ºC - 200ºC 5 ºC/min: 200ºC - 300ºC 3.4 ºC/min: 300ºC - 400ºC
Thermocouple	K type
Temperature Controller	30 segments programmable temp. controller Built-in over-temperature protection
Vacuum Level	Vacuumn level of oven after pumping < 133pa (1 torr)
Float Meter	200~2000ml/min

 

 

 

 

 

Photos for Drying Oven

 

 

 

 

 

 

 

dental furnace

Packages of Drying Oven

Plastic paper inside, Polyfoam filled, Wooden box outside,best ways to protect the drying oven.

 

 

dental furnace

Our Service:

1. Reply your inquiry in 24 working hours.

2. Experienced staffs answer all your questions in fluent English.

3. Customized design is available. 

4. Exclusive and unique solution can be provided to our customer by our well-trained and

professional engineers and staff.

5. Professional factory : We are manufacturer, specializing in laboratory furnaces.