VARIABLE VOLTAGE REGULATOR SUPPLY

VARIABLE VOLTAGE REGULATOR SUPPLY 

PRINCIPLE OF OPERATION: The Variable Voltage Supply/ Regulator consist of following basic components depending on the rating of the equipment.

1) Step up Transformer

2) Buck boost transformer

3) Rolling contact type voltage regulator

4) Automatic control gear.

 Variable Voltage Supply/ Regulator with constant Input and variable output. It consists of a Step up Transformer, Regulators and Buck Boost transformer. This circuit is normally used to Vary on load voltage when the regulator used in conjunction with buck/boost transformer and step up transformer.

 The equipment are available with following control devices:

 a) Manual version

 b) Motorised version

 c) Remote control

In manual version a Hand wheel / T – Handle is provided and desired output voltage can be obtained by rotating the Wheel / Handle manually.

In case of motorized version and servo motor will be provided which can be operated by two sets of push buttons or toggle switch for raising and lowering the output voltage.

 In case of remote control arrangement one extra set of push buttons will be provided in your main panel from where the operator would be able to maintain the desired voltage with the help of those push buttons.

We make variable voltage supplies from 0- 470 V/ 1000 V /1200 V/ 3300/11000 V or any Desired voltage up to 7000 KVA. These variable voltage supplies are used for special purpose applications and testing.

PRINCIPLE OF OPERATION: The Variable Voltage Supply/ Regulator consist of following basic components depending on the rating of the equipment.

1) Step up Transformer

2) Buck boost transformer

3) Rolling contact type voltage regulator

4) Automatic control gear.

 Variable Voltage Supply/ Regulator with constant Input and variable output. It consists of a Step up Transformer, Regulators and Buck Boost transformer. This circuit is normally used to Vary on load voltage when the regulator used in conjunction with buck/boost transformer and step up transformer.

 The equipment are available with following control devices:

 a) Manual version

 b) Motorised version

 c) Remote control

In manual version a Hand wheel / T – Handle is provided and desired output voltage can be obtained by rotating the Wheel / Handle manually.

In case of motorized version and servo motor will be provided which can be operated by two sets of push buttons or toggle switch for raising and lowering the output voltage.

 In case of remote control arrangement one extra set of push buttons will be provided in your main panel from where the operator would be able to maintain the desired voltage with the help of those push buttons.