Home > Products > AUTOMATIC VOLTAGE REGULATOR > POWER STABILIZER 500 KVA
POWER STABILIZER 500 KVA
- 100 Unit / Units per Month
- MUMBAI
- T/T D/P D/A Credit Card
- Acrel ABAT-S battery-powered module device for Battery Monitoring System less than 13mA (1.2V&2V) or 7mA(6V&12V)quiescent
- Acrel ABAT-S battery analyzer monitoring system On-line monitoring of the voltage internal resistance of each backup battery
- Acrel ABAT-C Battery Monitoring Module Lead Battery Charge Discharge output 4-20mA
- Acrel ABAT Battery Monitoring System used for Base Station for 2V/6V/12V Lead Acid Batteries with RS485 communication
- Acrel ABAT-S battery analyzer monitoring system Interfaces with most UPS controller
- Acrel ABAT-S Lead-acid module device per battery to monitor internal resistance voltage and temperature
Product Details
Place of Origin: | Gujarat, India | Brand Name: | PEC | Model Number: | 500 KVA |
Product Description
POWER STABILIZER 500 KVA
Voltage Optimisation (or Voltage Power Optimisation) is the name given to an electrical energy saving technique, whereby a specialist optimisation device is installed in series with the mains electricity supply to site to give an optimum supply voltage for the site’s equipment, and improve power quality by balancing phase voltages, and filtering harmonics and transients from the supply. The type of device used determines whether the power supply is being ‘optimised’ or merely reduced (voltage reduction can be achieved using automatic voltage controller) Voltage optimisation technology gives the end-user the ability to optimise their supply locally, correcting power quality problems from the grid, and is designed to do so very efficiently. In the UK and Europe, voltage optimisation units fitted have achieved average energy savings of around 13% over the last five years, making this one of the fastest-growing energy saving techniques on the market. Major businesses and Public Sector organisations have adopted Voltage Optimisation as a front-line energy saving measure.
Over voltage
Over voltage refers to voltage higher than the voltage at which equipment is designed to operate most effectively. It causes a reduction in equipment lifetime and increases in energy consumed with no improvement in performance. The 16th edition of the Electricians Guide BS7671 makes the following statements in relation to over voltage: “A 230V rated lamp used at 240 will achieve only 55% of its rated life” “A 230V linear appliance used on a 240V supply will take 4.3% more current and will consume almost 9% more energy.” Various technologies can be used to avoid over voltage, but it must be done so efficiently so that energy savings resulting from using the correct voltage are not offset by energy wasted in the device used to do so.
Effects on electrical loads
A common misconception as far as voltage power optimisation is concerned is to assume that a reduction in voltage will result in an increase in current and therefore constant power. Whilst this is true for certain fixed-power loads, most sites have a diversity of loads that will benefit to a greater or lesser extent with energy savings aggregating across a site as a whole. The benefit to typical equipment at three phase sites is discussed below.
Three Phase AC Motors
Three phase AC induction motors are probably the most common type of three phase load and are used in a variety of equipment including refrigeration, pumps, air conditioning, conveyer drives as well as their more obvious applications. The de-rating effects of over voltage and three phase imbalance on AC motors are well known. Over voltage results in saturation of the iron core, wasting energy through eddy currents and increased hysteresis losses. Drawing excessive current results in excess heat output due to copper losses. The additional stress of over voltage on motors will decrease motor lifetime. Avoiding over voltage does not affect the motor speed since this is a function of the supply frequency and the number of poles in the motor provided the motor is correctly loaded. Nor does it reduce the efficiency of the motor and so substantial energy savings can be made through reducing iron and copper losses. This is especially apparent if the motor application means that it experiences a variety of loading conditions since the motor efficiency is further reduced with both over voltage and less than full loading.
Lighting
Since lighting loads are in use for a high proportion of the time, energy savings on lighting equipment are extremely valuable. Incandescent lighting is particularly susceptible to wasting energy and decreased lifetimes at high voltages, as the previous extracts from the Electricians Guide illustrate. However, other types of lighting can also benefit from improved power quality, including systems with resistive or reactive ballasts. Fluorescent lighting is more efficient than incandescent lighting and there are also types of electronic voltage optimisation control systems for high-frequency lighting, which would not see an improvement in lifetime or energy consumption on the same level as incandescent lighting. However, lighting controllers and ballasts are responsible for generating high levels of harmonic distortion, which can be filtered with a voltage optimiser, in addition reducing the need for lighting controller. A common concern is that some lighting will fail to strike at lower voltages. However, this should not occur since the aim of voltage optimisation is not simply to reduce the voltage as far as possible, but to bring it to the voltage at which it was designed to operate most efficiently.
Power factor and reactive power
The power factor of an electrical supply is the ratio of the real power to the apparent power of the supply. It is the useful power used by the site divided by the total power that is drawn. The latter includes power that is unusable, so a power factor of 1 is desirable. A low power factor would mean that the electricity supplier would effectively supply more energy than the consumer’s bill would indicate and suppliers are allowed to charge for low power factors. Reactive power is the name given to unusable power. It does no work in the electrical system, but is used to charge capacitors or produce a magnetic field around the field of an inductor. Reactive power needs to be generated and distributed through a circuit to provide sufficient real power to enable processes to run. Reactive power increases significantly with increasing voltage as the reactance of equipment increases. Correcting this with voltage optimisation will therefore lead to a reduction in reactive power and improvement in power factor.
Energy and Emissions Savings
The energy savings achieved by voltage optimisation are an aggregation of the improved efficiency of all equipment across a site in response to the improvements in the power quality problems outlined above. It has been and continues to be a key technique for savings in energy consumption.
SO, PRACTICALLY EVERY INDUSTRY NEED SYSTEM WHICH MAY KEEP THE VOLTAGE CONSTANT. To maintain the voltage stabilizers are available in the market for refrigerators, electrical machines and electronic equipments but these are of very low capacity. POWER ENGINEERS have developed and installed industrial voltage CONTROLLERS which are suitable for 100% continuous duty cycle supplied up to 6000 KVA which have more than 99.5% efficiency.
If you are getting HIGH voltage for few hours a day, by maintaining the output voltage at 400/415 volts you will certainly achieve the under noted advantages after installing Automatic Voltage Controller.
- Reduction in breakdown of electrical equipments: 60-80% reduction in breakdown.
- Energy saving : 5 to 10% on motor load & 15-25% on lighting load.
- Reduction in MDI : Definite reduction in MDI by 10-15%.
- Improvement in power factor : In case of high voltage only.
- Depreciation allowance @ 80% as per Income tax Act
- Uniform quality of end product.
Contact Us
- POWER ENGINEERS COMPANY
- Contact nameATUL KHOSLA
- Phone91-9714-777713
- Address967/2/2, GIDC, MAKARPURA,
- Overhead Line High Voltage Line fault locator Device
- earth fault indicator distribution system
- big diameter welded steel tube
- wind tower pole
- substation steel structure
- monopole steel tower
- power transmission line steel tower
- Electrical equipment frequency converter
- Vector Frequencyinverter
- Overhead power line fault indicator with Three color light display
- short circuit and earth fault indicator distribution system
- Current Temperature And Faults On-line Monitoring instrument
- how to reset overhead line earth fault indicator
- Electric Power Overhead type Cable Fault Indicator
- Simulated Failure Remote Controller for Overhead Line Fault Indicator
- Flag type Overhead type Short circuit &Ground Fault Indicator
- Installation adapter of Overhead Line Fault Indicator
- short circuit and earth fault passage indicator with good price
Popular Searches
Recommended Products
- Power adapter 12V15A 18A 20A 25A desktop industrial cabinet water purifier switching power supply
- Power adapter 12V 18V 24V 36V 48V plastic shell 360W water purifier cabinet switching power supply
- 18 Years Experience IATF Certificated Permanent Magnetic Encoder Magnet
- 12V medical power adapter CE ETL UKCA certification 12V15A 20A sufficient power
- High-Speed Permanent Motor Rotor Magnetic Assemblies Magnet Rotor
- VFD manufacturer 7.5kw 10HP 220v single phase input and 3Phase output AC variable frequency drive with CE ROHS certificate
- 360W plastic shell 24V15A power adapter industrial medical equipment power supply
- High-Speed Permanent Magnetic Rotor Assemblies With Power-Dense Permanent Magnetic Rotor Materials
- 18 Years Experienced Manufacturer Black Epoxy Coating Neodymium Magnet Bonded Ndfeb Magnet For Motor Stator
- Stable Supply Neodymium Motor Magnet with Rotor Customized Permanent Magnetic Generator Industrial Magnet Clay Moulding Magnet
- 24V8A power adapter 24V water purifier heating equipment switching power supply
- Lind Forklift E35 UK E35 HAWKER Hawker Forklift Battery Forklift Battery 5PzS700
Find Similar Products By Category
- Electrical Equipment & Supplies > Power Distribution Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
ATUL KHOSLA
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-