twin wall corrugated plastic sheet

Specifications

twin wall corrugated plastic sheet
1.Low water absorption
2.non-sticking
3.Excellent self-lubrication
4.Super wear resistant

twin wall corrugated plastic sheet  

 

1. abrasive resistance which always have in thermoelectricity polymer.
2. best shock resistance even in low temperature.
3. low frictional factor, and well sliding bearing material
4. lubricity( no caking, in adhesion)
5. best chemical corrosion resistance and stress craze resistance
6. excellent machinery process ability
7. lowest water absorption(<0.01%)
8. paragon electric insulativity and antistatic behavior
9. nice high energy radioactive resistance
10. density is lower than other thermoplastics (< 1g/m3)
11.  long using temperature range: -269°C--85°C

 

Project name	Unit	Standard
Impact strength	KJ/m2	≥140
Water absorption	%	≤0.01
Compressive strength	Mpa	≥30
Ball indentation hardness	N/mm2	≥20
Friction coefficient		0.11-0.17
Abrasion loss	G/cm2	3.8×10-4
Heat distortion temperature	°C	85°C

 

 

 Application 

        HDPE has excellent abrasion resistance it  is often used for lining chutes, hoppers,slideways and wear blocks in aggressive enironments. it is often found in food production environments where high volumes of containers need to be guided along conveyors or production lines. Because its low moisture absorption, it is also found in some high demand areas of marine applications. UHMWPE is sometimes used in cryogenic components due to its low operating temperature abilities.   twin wall corrugated plastic sheet