Flexo printer slotter and die cutter with chain feeding

Specifications

Flexo printer slotter and die cutter with chain feeding
1.CE,ISO
2.good service
nical support
4.good reputation

        G&Z GROUP

 

Flexo printer slotter and die cutter with chain feeding

 

Machine picture

 

 

 

 

Company profile

 

 

 

 

 

 

 

 

Main technical parameters

 

 

model	SYK1600
Forme roller dia.	¢540mm(including forme thickness 6mm)
Forme roller length	2000mm
Forme thickness	3-6mm
Max. working speed	50sheet/min
Max. printing size	1550×1700mm
Max. sheet size	1600×1800mm
Min. sheet size	360×650mm
Sheet thickness	3-12mm
Machine wall thickness	40mm
Chromatography accuracy	±0.5mm
Main motor power	11 KW, 380V, 3phases, four lines
Moving motor power	0.37Kw, I=1:43, safety clutch, unit moving, 380V, 3phases, four lines
Ink distributing motor power	0.75Kw, I=1:43, 380V, 3phases, four lines
Counter-printing roller diameter	1271mm

 

Main assembly

 

1) 360 degree electrical phase adjustment, braking motor 0.37Kw, 200 dots coder.

2) pneumatic pump for ink supply.

3) pneumatic single unit lock, and the whole machine general lock.

4) units electrical moving with electromagnetic safety clutch.

5) ink roller pneumatic lifting and automatic ink distribution.

6) pneumatic inking.

7) automatic counting.

8) moving safety alarm.

9) automatic lubricant supply.

10) units movement driven by the printing unit, and the die cutting unit is fixed, which improves the stability of the whole machine.

 

Main performance

 

I. transmission system

1) adopting #45 steel as the material for the whole transmission gears, improving the stability and the lift, decreasing the noise.

2) adopting satellite flat type adjustment for the transmission, which improving the gears’ life and the accuracy of the printing.

II. feeding unit

1) chain feeding, there are dust-removing brush and paper pressing wheels at the front edge, which make it easy to feeding and can remove dust on the paperboard to improve the quality and definition of the printing.

2) The upper and lower feeding shafts are made of good quality steel, and have tested by dynamic balance. There are two pressing wheels on the upper shaft, they can impress the paperboard edges as well as feeding, which will be helpful for carton stitching.

III. printing unit

1) on the print unit, mounted terminal box controlling production counting, machine speed and displaying the products quantity.

2) The forme roller has been tested by dynamic balance, which makes it running stably. The printing distance can be adjusted manually, and can lock by itself, adjust arrange is 2-12mm. Also, there are coordinate lines on the forme roller, which makes it easy to paste the forme. And the forme roller can be adjusted in axial direction for 10mm.

3) Adopting 360 degree electrical adjustment, and can adjust during working or while stopping, VFD control. And two adjusting modes: automatic and manual, and during automatic adjusting, the parameters values can be set on the phases meter, then pressing related buttons to make it reach the right position automatically. What’s more, the unit locking cylinders make each unit can return the correction position after separating.

4) Special transmission mode makes the inking even, clear without ink depositing.

5) Pneumatic diaphragm pump supplying ink, and the ink quantity can be adjusted by air pressure, even ink supply, easy clean and saving ink.

6) Inking by rubber roller and anilox roller, and driven directly by the forme roller gear, which ensures the same linear speed.

IV. Slotting section

1)locking cylinder structure. When the slotting unit separates from the printing unit, the knife disc position can be locked, then when the two units close together, it can keep at the same position. And there are gears on the slotting knife shaft to make the knife discs easy to move.

2) the phase positions adjustment is the same as do in printing unit.

3) the thickness of the slotting knife is 7mm, alloy material.

V. die cutting unit

1) Consisting of die roller and rubber mat roller, there is differential compensator which ensures the die cutting accuracy and keep the same linear speed with the die wheel.

2) The die roller is lower roller, knife 25.4X1.42mm, and the knife wheel shaft can be adjusted for 10mm right and left.

3) Phase adjustment mode is the same as that of printing unit, the rubber mat roller can be moved mechanically for 30mm right and left, and the rubber mat repair system is adopted.

Installation

 

To be made by one of our engineers, and the buyer should buy him the int’l round flight tickets, and bear his hotel, food, traffic, etc.

  

Main production

 

 

Where we are