Home > Products > Auto Brake Parts > semimetal china brake pads factory
semimetal china brake pads factory
- 5000 Piece / Pieces per Month
- Tianjin
- T/T L/C D/P D/A Credit Card PayPal
Product Details
Type: | Brake Pads | Material: | Ceramic | Certification: | ISO |
Car Make: | Car | Place of Origin: | Hebei, China | Brand Name: | RC |
Model Number: | brake pads |
Product Description
semimetal china brake pads factory
Specifications:
- high and steady coefficient of fricition with the change of temperature
- Proper hardness auto brake shoe
- brake smoothly
- Excellent friction property, lower wear rate and high rotary burst strength in high temperature with good durability.
- Less dust car brake shoe
- don’t scratch mating plate or opposing material
- Long service life
- Noiseless
Material | Aluminum A380, Aluminum A383,ductile iron, low carbon steel, stainless steel 304,316,316L,grey iron |
Process | Aluminum die casting, sand casting, lost wax casting, cast iron casting,stamping, machining |
characteristics
| Highest operating temperatures Outstanding corrosion resistance Light-weight Very good strength and hardness Good stiffness and strength-to-weight ratio Excellent EMI & RFI shielding properties Excellent thermal conductivity High electrical conductivity Good finishing characteristics Full recyclability
|
Industry Standards Met | ISO 9001:2008 Certified |
Tooling material | Urethane Aluminum Steel Iron
|
Casting mold type | Automatic Molding ,Cope and Drag |
Stopping Performance
Low Brake Noise Performance
Durability
Consistent Pedal Feel
Good Brake Fade Recovery
Friction Formulation: Federal-Mogul quality materials
Great value for money!
How To Change Brake Pads. (F&R)
FRONT
remove the wheel
remove the top from the brake fluid tank in the engine bay
now pull the pads out.. if tight use a long flat blade screwdriver to ease the piston back being careful not to damage the disc.
now remove the pads.
using a cloth to protect the discs leaver the pistons as far back as they will go using the screwdriver.
now place some copper grease on the back of the new pads
place the outside pad (the one with the clip) in first then slide the rear pad in. some force may be needed unless the piston is as far back as possible.
now this one is done
the wheel and repeat on the other side.
here is an exploded view of the front bakes
REAR
remove the wheel
this time undo the caliperby removing the 2 bolts from the rear of it (top & bottom)
now remove the pads..
to push the piston back, you need to push and turn it at the same time.
use some long nose pliers to do this as the correct tool is around £90
now place some copper grease on the back of the new pads
place the outside pad in first then slide the rear pad in. some force may be needed unless the piston is as far back as possible.
now this one is done
bolt the caliper back into place
place the cover back onto the brake fluid tank.
replace the wheel and repeat on the other side.
here is an exploded view of the rear
job done..
just start the car and press the brake pedal for the pads to move and be seated into the correct postion.
take it easy for a couple of miles as they will bite quite harsh.
Product pictures
semimetal china brake pads factory
Our Services
1. 100% test before shipment.
2. Adequate supply capacity and delivery timely.
3. Reasonable price for you.
4. We report our production schedule to customers everydays by email or photos,it's just like the production is happend under your nose.
5. Both in -house QC and lab test provided.
FAQ
What is the warranty?
30000kms and 50000kms .
Brake pads include shims or not?
According to customer's
Delivery time?
15 days after order confirmed
What is “Positive Molding Technology” and why is it better?
Positive Molding Technology is an important factor in production of Top products.Positive molding results in a more uniform density in the production of the brake pad. It also allows using less resin content in formulation of the brake pad which can lead to improvement in the fading characteristic of the brake pad. The brake pads produced by positive molding process is proven to have much better stopping performance.
How Can I Replace My Own Brakes
1.Get the correct brake pads.
2.Make sure the vehicle is cooled down.
3.Loosen the lug nuts.
4.Carefully jack the car up until it can be removed comfortably.
5.Remove the wheels.
6.Tighten the lug nuts.
7.Start the vehicle.
8.Test your new brake pads.
The Motor Works is equipped to handle all modern braking systems including anti-lock braking systems and electronic brake controls. We re-set the brake pad warning lights after servicing your brakes and offer very competitive pricing on all brake repairs.
semimetal china brake pads factory
Contact Us
- Xingtai Richen Trade Co., Ltd.
- Contact nameZhao zi long
- Phone0086-319-8315720
- Addressxin hua road Xingtai,Hebei
- Best Seller for BD 65174 USA Type Trailer Parts Automatic Slack Adjuster with OEM Standard
- Automatic Slack Adjuster 400 Series AA1 OE.: 40010143
- OE NO.:80008 Grey Color ASA for Benz Brake System
- Auto brake system for BPW manual slack adjuster 3354200338
- 1488083 Truck brake solenoid valve for Scania truck splitter gearbox 1408080
- SHACMAN Shaanxi Automobile Delong Truck accessories Original Factory Brake Master Valve (Low Pedal Force) DZ96189361080 X5000X6000 New M3000X3000
- High quality auto parts manual slack adjuster for SCANIA 278735 276518
- Manual brake adjuster for HINO 47480-1590
- Nissan truck brake adjuster 44341-90166 manual slack adjuster
- Truck parts auto slack adjuster for SCANIA 72664
- Truck brake parts auto slack adjuster for R803112 USA type
- Automatic slack adjuster for R803110 USA type
- Auto parts DONGFENG automatic slack adjuster 79353
- Auto accessories DONGFENG automatic slack adjuster 79352
- Auto parts DONGFENG slack adjuster for truck 79353
- Truck parts automatic slack adjuster for STR 0257 0258
- Auto spare parts automatic slack adjuster for DAF 79167
- BENZ automatic slack adjuster 70952 for truck parts
- Auto spare parts for BENZ slack adjuster 70953
- Truck parts auto slack adjuster for SAF 72931
- Manual slack adjuster for BPW 3354200338 Euro type
- Manual slack adjuster for BPW 0517452610 Euro type
- Auto spare parts for BENZ slack adjuster 70867 truck parts
- Truck parts for BENZ slack adjuster 70952 auto spare parts
Popular Searches
Recommended Products
- New S200 Turbo For Deere Various 6068 Engine 177261 177263 168685 170263 172448 173052 RE509436 RE522691 RE515736 Turbocharger
- New K31 Turbo For MAN Ship D0836LE401 D2848LE403 Engine 53319706730 53319886701 53319706701 51091007396 51091007638 Turbocharger
- Diese Fuel Injector 4940786
- Diese Fuel Injector X59407500022
- Diesel Nozzle Fuel Injection 6801055
- Diesel Nozzle Fuel Injection 6801124
- Diesel Fuel Plunger & BarrelSAY110PN47A
- commom rail parts valve U256W
- commom rail parts valve 7206-0379
- commom rail parts valve F176
- DFM Road cleaning truck
- Diesel Common Rail Valve F 00R J01 051
Find Similar Products By Category
- Automobiles & Motorcycles > Auto Chassis Parts > Auto Brake Systems
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Zhao zi long
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-