semimetal motorcycle brake shoe

  Brake Shoe Replacement                                                                   

 When the brakes are applied the primary shoe is forced into contact with the brake drum by the piston of the wheel cylinder. The rotating brake drum then drags the primary brake shoe along with it in its forward rotation. This forward motion wedges the shoe into the drum and transfers to the secondary shoe, which is also forced into the drum with help from the wheel cylinder's piston. Brake shoe anchors are attached to the backing plate and allow for the brake shoes to come into full contact with the drum, providing an anchor for the momentum.

   Product pictures                                                                           

brake

semimetal motorcycle brake shoe

pad/ brake lining/ brake shoe wholesale Half metals, graphite, ceramics 

   Our Services                                                                           

1.  100% test before shipment.

2.  Adequate supply capacity and delivery timely.

3.  Reasonable price for you.

4.   We report our production schedule to customers everydays by email or photos,it's just like the production is happend under your nose.

5.   Both in -house QC and lab test provided.

   FAQ                                                                                         

What is the warranty?

30000kms and 50000kms .

Brake pads include shims or not?

According to customer's 

Delivery time?

15 days after order confirmed

What is “Positive Molding Technology” and why is it better?

Positive Molding Technology is an important factor in production of Top products.Positive molding results in a more uniform density in the production of the brake pad. It also allows using less resin content in formulation of the brake pad which can lead to improvement in the fading characteristic of the brake pad. The brake pads produced by positive molding process is proven to have much better stopping performance.

How Can I Replace My Own Brakes

1.Get the correct brake pads.

2.Make sure the vehicle is cooled down.

3.Loosen the lug nuts.

4.Carefully jack the car up until it can be removed comfortably.

5.Remove the wheels.

6.Tighten the lug nuts.

7.Start the vehicle.

The Motor Works is equipped to handle all modern braking systems including anti-lock braking systems and electronic brake controls. We re-set the brake pad warning lights after servicing your brakes and offer very competitive pricing on all brake repairs. 

semimetal motorcycle brake shoe