Contact Platform Support
Help CenterLow Friction Ptfe Washers ,standard Non-standard Gasket/cups/rolls
Related Products
-
PTFE Products ,standard Non-standard Gasket/washer/cups/rollsUS$ 0.01 - 10MOQ: 100 Packs -
PTFE Products Gasket/washer/cups/rollsUS$ 0.01 - 10MOQ: 100 Packs
-
Large Thin Size PTFE Gasket/washer/cups/rollsUS$ 0.01 - 10MOQ: 100 Packs
-
High Request PTFE Flat Thin Washer /gasketUS$ 0.01 - 10MOQ: 100 Packs
-
Factory Made PTFE Flat Thin Washer /gasket/wear RingsUS$ 0.01 - 10MOQ: 100 Packs
Specifications
1.material:PTFE2.type:Pure PTFE gasket
3.Standard or Nonstandard:Nonstandard
4.Elongation @ Break:800%
5.Hardness:Shore 54D
ptfe gasket
PTFE spacer is chosen suspended aggregation teflon resin shaped or cutting into porcessed.Teflon compared with other plastics with a corrosion resistant chemical characteristics Naiwen Merit.It has been widely used as a sealed materials.
Application
Enhanced PTFE product have strong corrosion-resistance and friction-resistance.By adding filler such as glass fiber,carbon fiber,graphite,MOS2.Al203,Carbon fiber powder, compression strength and abrasion-resistance of the product is improved.In addition, it will have good heat conductivity and low heat expansion coefficient.High frequency coaxial coupling,Connector and attenuator in electronics and telecommunication,Also it is applicable to various sealing gasket,sealing plug or sealing seat in valves,air conditioner,refrigerator and automotive parts as well as other apparatus with high precision requirement.
Specification
Item |
Unit |
Range of work |
Inter ID |
mm |
1~2000mm |
Outer OD |
mm |
2~2000mm |
Thickness |
mm |
0.3~50mm |
Filled Materials |
Graphite ,Glass Fiber , Carbron fiber , Bronze |
|
STANDADR OR NON -STANDARD PLSTIC ITEMS
CUSTOMIZED FOLLOWING DRAWING AND SAMPLE
100-1000 pcs in one bag or customized
1.Your inquiry related to our product & price will be replied within 24hours.
2.Well-trained & experienced staff are to answer all your inquiries in English of course.
3.0Working time: 8:00am ~5:30pm, Monday to Friday(UTC+8).
4.Any types can be customzied following sample and drawing
1. What is your minimum quantity ?
As a general rule we would produce quantities of 500pcs or more, although on occasions we have produced
orders for less than 500. However, for one off small orders unit costs are likely to be very high costs.
2. How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.Free for a sample to check quality.
3. Can you do the design for us?
Yes. We have a professional team having rich experience manufacturing.
Just tell us your ideas and we will helpt o carry out your ideas into products.
Send Inquiry to This Supplier
You May Also Like
-
Stainless Steel Graphite Composite Gasket and PTFE Sleeve, PTFE Tape With PatentNegotiableMOQ: 100 Pieces
-
Perkins 1825661C94 HEADER ASSEMBLY FILTER FUEL ASY for Caterpillar EngineNegotiableMOQ: 1 Piece
-
Silicon Rubber Oil Seals High Pressure Mechanical Seal Pump Shaft Seal Oil Seals Mechanical Seal Rubber Input Shaft Oil SealUS$ 0.30 - 0.40MOQ: 50 Pieces
-
Cylinder Seal Kits CLFY500/420-90 Hydraulic Seal Kit for Hydraulic CylinderNegotiableMOQ: 1
-
Fine Processing TC Oil SealUS$ 0.01 - 15MOQ: 100 Pieces
-
Tungsten Carbide RingUS$ 1 - 5MOQ: 100 Pieces
-
Neoprene Heat Insulation Anti-UV Aging Rubber Seal StripsUS$ 0.02 - 3.6MOQ: 1000 Meters
-
Motorcycle Parts Oil Seal Garlock Oil Seal Garlock Oil SealUS$ 0.1 - 9.2MOQ: 100 Pieces
-
Seal Bag ClipNegotiableMOQ: 5000 Sets
-
High Temperature Basalt Fiber Braided Rope/ String/ CordUS$ 1.7 - 2.3MOQ: 500 Meters
