Contact Platform Support
Help CenterFootwear Applications Hot Melt Applicator-TH-2004D-300ML
Related Products
-
Baby Diapers Hot Melt Applicator-TH-2004D-300MLNegotiableMOQ: 1 Piece -
TH-2004D-300MLHot Melt Dispenser For Disposable Hygiene ProductsNegotiableMOQ: 1 Piece
-
Baby Diapers Hot Melt Applicator - TH-2004D-300MLNegotiableMOQ: 1 Piece
-
Nonwoven Product Hot Melt Applicator - TH-2004D-300MLNegotiableMOQ: 1 Piece
-
TH-2004D-300ML Hot Melt Automation Spray MachineNegotiableMOQ: 1 Piece
Specifications
1. Hot Melt Adhesive coating Machine2. Replace the manual dispensing hot melt glue
3. Custom-built Machine Avalibale
footwear applications Hot Melt Applicator -TH-2004D-300ML
Hot Melt Adhesive coating Machine-hot melt tank controller
Replace the manual dispensing hot melt glue in a variety of flat or curved surfaces of workpiece.Adaptable to a variety of hot melt adhesive
Best selling desktop glue dispensing robot TH-2004D-300ML
Specifications:
|
Gear pump hot melt machine
|
SPECS |
Installation power |
220V/2450W
|
Air pressure |
0.5-4kgf/cm2
|
Pump type |
Gear-pump
|
Motor |
Variable speed brushless AC
|
Speed |
7KG/HR |
Viscosity |
500-100,000cps |
Capacity |
5 Liters
|
Output volume |
150G/min
|
Temperature control |
Direct panel control |
Temperature |
20-220°C |
Nozzle |
spray
|
spray width |
1mm-6mm
|
Action |
Spraying close dot, line |
Dimension |
65 x45 x35CM |
Weight |
50kg
|
Selling points /Focus
- Used in the single product much volume fill glue, same save replace material time and waiting for the glue heating time, up production ratio
- Floor-standing design, moving convenience
- 20KG capacity deep rectangular PTFE coated tank.
- 7KG/HR melt rate, 150cc/min gear-pump rate.
- 3 zone temperature control over 7 ranges up to 220°C
- Single hose outlet - standard hose length1.5m. Other add hose outlet using for reserve
- Power source 220/230V AC system
- Gear-pump for consistent, pulse-free repeatable dispensing
- Adopts internationally computer touch-pad control system to controls provide temperature settings of tank, hose, valve.
- Designed for low- to medium-viscosity dispensing up to 100,000 cps.
- Progressive heating and multiplayer filter. Effectively prevent the Impurities Into machine damage the pump gear
- With the function of high temperature protection function.
- Reduced material degradation, Optimum production output
Related products
Hot Melt Machine(Adhesive feed system)
Dispensing Robot (300*300*100mm)(400*400*100mm)(500*500*100mm)
Quality gurantee
We provide 1 years warranty of product and shipment with one set fitting to you
Factory Picture
Send Inquiry to This Supplier
You May Also Like
-
TH-2004D-300ML Spray Head Hot Melt AdhesiveNegotiableMOQ: 1 Piece
-
TH-2004D-ML Hot Melt Glue Dispenser MachineNegotiableMOQ: 1 Piece
-
TH-2004D-300ML Gear Pump Hot Melt Machine 5 LiterNegotiableMOQ: 1 Piece
-
TH-2004D-300ML Spray Process for Hot Melt AdhesiveNegotiableMOQ: 1 Piece
-
TH-2004D-300ML Hot Melt Dispensing EquipmentNegotiableMOQ: 1 Piece
-
TH-2004D-300ML Spray Head Hot Melt Adhesive Coating MachineNegotiableMOQ: 1 Piece
-
TH-2004D-300ML Spray Process for Hot Melt Adhesive WorkNegotiableMOQ: 1 Piece
-
TH-2004D-300ML Hot Melt Glue Automation Dispensing SystemNegotiableMOQ: 1 Piece
-
Hot Melt Glue Applicator China Manufacturer - TH-2004D-300MLNegotiableMOQ: 1 Piece
-
Hot Melt Adhesive Coating Machine China Manufacturer - TH-2004D-300MLNegotiableMOQ: 1 Piece
