good quality 2x18w 20w electronic ballast fluorescent

Specifications

18w 20w electronic ballast fluorescent
1.CE,CB,SAA,ROHS approved
2.OEM service,high quality 3.PF:0.98,THD:15%
3.120v or 230v

good quality 2x18w 20w electronic ballast fluorescent

 

1.Apply plug- in wiring terminal, convenient installation.
2.Long life low current wave peak
3.High Power factor
4.Low Total Harmonic Distortion,low lamp current crest factor
5.EMC effection:Pass,
6.Comply to EN 61347-1,EN 61347-2-3,EN 55015,EN

61547,EN 61000-3-2,
7.Start mode :Preheat start or instant start selectable
8.Average usable life:>20000hrs,
9.AC voltage range(min-max)170-264V
DC voltage range(min-max)198-276V
10.Energy Efficiency:EEI=A2
11.Suitable for automatic and manual wiring.
12.suitable for emergency lighting.
13.Safe switch off of defective lamps
14.Automatic re-start after lamp change.
15.Protection against lamp fault condition.
(contain End of lamp life protection.)
16.End of lamp life,over-heat,over-load protection
17.Ingress protection:IP20

Features of electronic ballast:

1. Favorable low voltae starting performance,start the lamp

under 130v low voltage,power supply.

2. Apply plug-in wiring terminals,conbenient installation apply

electronic soft start technology; outstanding performance,long life

low current wave peak ratio,

3. The electromagetic compatibility reaches the national

standard,high power factor >0.98

Model	light source fitted	Rated voltage	PF	line power	THD	LCCF (crest Factor	Lamp connection
E218	T8 2×18W	110/220-240V50/60Hz	0.98	36W	15%	≤1.7	abreast
E230	T8 2×30W	110/220-240V50/60Hz	0.98	36W	15%	≤1.7	abreast
E236	T8 2×36W	110/220-240V50/60Hz	0.98	72W	15%	≤1.7	abreast
E258	T8 2×58W	110/220-240V50/60Hz	0.98	118W	15%	≤1.7	abreast
E218	PLL 2×18W	110/220-240V50/60Hz	0.98	36W	15%	≤1.7	abreast
E224	PLL 2×24W	110/220-240V50/60Hz	0.98	48W	15%	≤1.7	abreast
E236	PLL 2×36W	110/220-240V50/60Hz	0.98	72W	15%	≤1.7	abreast
E255	PLL 2×55W	110/220-240V50/60Hz	0.98	110W	15%	≤1.7	abreast