used 4 post parking jack for sale

Specifications

used 4 post parking hoist
1.Vehicle loading pallet fully enclosed design
2.to avoid oil leakage, rain and snow
3. CE

  

  

Common faults and maintenance methods:

 

Questions	Reasons	Solutions
The platform doesn’t rise ,Motor turns, no leakage of hydraulic oil	Air in the hydraulic oil	Non-load lifting to the apex ,need keeping some seconds then falling, stopped when falling to the middle, opened the oil connection to exhaust, then tighten.
	Low temperature made the hydraulic oil thickened	Anew replenish hydraulic oil
	Overloaded	Check and confirm the lifting weight is less than the rated load
Leakage hydraulic oil in the place of tubing joint	Joint loose	Screw down
	Joint was broken	Replace joint
Leakage hydraulic oil	Oil cylinder sealing ring was wear	Replace the oil cylinder and sealing ring
Motor do not turn	Motor burn out	Check and replace the motor
	The voltage is too low	Check and confirm the voltage for voltage regulation
	The fuse is bad	Replace fuse
	Limit switch is broken	Replace limit switch
Platform is not falling	Platform in the lock state	Control the platform rise and unlock, then control it falling
	The hydraulic oil is too thick	Replace hydraulic oil

  

Production name:4 Post parking lift PTJ 601

 

 

Drawing:

 

Specifications

 

Name	Four Post Parking Lift
Model	PTJ 601
Dimension	4500*2700*2086mm
Weight of parking car	2000kg
Rated speed	2.2 m/min
Lifting height	1800mm
Total height	2086mm
Width of post	2357mm
Motor	2.2kw
Warming devices	Yes
Mode of operate	Button / IC card / Remote key
Mode of control	Hydraulic control / PLC control
Mode of drive	Hydraulic driving, chain balance
Electrics	380v,3 phase; 220v single phase

 

Production Description:

 

·This parking system is designed of two spaces of up and down as one unit. The bottom car can go in and out directly. When the upper space needs to park a car, the car in the bottom should be driven out;

·Hydraulic drive, chain balancing device to ensure the balance both ends of rise and fall’;

·Low noise, smooth operation, save energy, low carbon and environmental protection;

·Vehicle loading pallet fully enclosed design, to avoid oil leakage, rain and snow

Polluting the lower vehicles;

·Spraying plastics, high anti-corrosion ability, long life. Electrical and driving parts with waterproof characteristics;

·Simple structure, easy installation, minimal requirements for civil engineering;

·It can be widely used in hotels, enterprises and public institutions and residential area.

 

  

 

Company Information

Qingdao Telian Machinery Co., Ltd. specializing in simple parking lift , auto lift ,parking facilities, shot blasting machines’ development and production. Main productions are two post parking lift ,four post parking lift ,tilting parking lift, pit type parking system, lift-sliding parking system, parking lock, road brake etc. convenient operation, beautiful appearance, save land area, high rate of land usage, convenient installation, low noisy etc. Adopt different site conditions.

 

Focus on quality improvement, technology innovation is our corporate philosophy. We are adhering to the following operating principles of ‘To survive with credit, to stabilize with mutual benefit, to develop with joint effort, to progress with innovation” we sincerely hope to establish win-win business relation with you.