300kg/h walnut hard skin dehuller/walnut husk remove machine

The new green walnut veneer peeling cleaning machine peeling freedom, walnut veneer into the hob area, high-speed operation of the hob to start cutting peel, walnuts while free rolling it all hob surface is cutting off the net walnut small diameter can not easily be cut into, constantly get out of peeling area, a small amount of net peel was not cut wire brush to remove, clean and get out of walnut processing zones, into the container.

    Continuous feed of new walnut, Peeling after discharge. The distance between the grille and peeling hob can be automatically adjusted, can also be manually adjusted by adding or subtracting shims region according to the size of walnuts, peel the thickness, to reduce the rate of broken shell, improving off the net rate.

2.Technical parameters

3. Maintance of the walnut peeling machine 

1. Before running the Walnut Shelling Equipment, check up each bearing, if it is lack of oil, 

please add engine oil.
2. If not use for a long time, please clean the machine and keep little engine oil in the 

parts need lubrication so that it does not rust. 
3. Reuse the machine, run the machine with nothing 10-15 minutes, remove the sundries, 

and then heating the machine to work.