Waterproof IP65 12V/24V Magic RGB 5050 SMD LED Strip Light

                   Waterproof IP65 12V/24V Magic RGB 5050 SMD LED Strip Light                                    

12V LED Strip Light :

5M 5050 RGB 300LEDs strip light, with 3M adhesive tape on the back. This flex is cutable every 3 LEDs at the marked intervals

and rejoined by a simple solder or quick connector.

       Voltage: 12V
       Working current: 6A
       Output Power: 72W
       Beam angle: 120⁰
       LED density: 300LEDs/5M, 60LEDs/M
       Feature: brightness adjustable by controller

Controller:

This is a product including a 72 watts LED control box and a 24-key IR remote,with an very advanced computer controlling

chip in it. LED control box connects to LED product, through the infrared receiver, the remote realize an effect of color, speed

and mode changing of total 16 colors, 5 pattern, 16 static mode, 16 speed controlling, 8 levels for brightness+ and brightness-..

Power Supply:

       Converting 100V-240V AC into 12V DC to support LED lighting system.
       Input voltage:100V-240V, 50/60 HZ
       Output voltage: 12V

Features:

1. Controllable-color changing and modes changeable

2. Flexible - fits just about any space you can imagine-Easy Installation-for both professionals and amateurs
3. Complete strip kit including 300LEDs strip, LED dimmer and 12V power supply-Just plug and Cut-table and link-able - mix

and match lengths and sizes to your choosing-Eco friendly - only requires a fraction of the electricity needed to a power an

equivalent lumen bulb

4. With this strip kit,you an easily get a party effect. Simply touch to achieve your favorite lighting environment.

About after-sales:

1.This quotation valid for a month,the price is based on Ex-works(not incl. V.A.T. & Shipping charge),issue V.A.T. invoice should add 10%.

2. Free offer technology support and handle any solution promptly and timely according to every situation.

3. Within two years as warranty once receiving our products. Non-artificial damage can be freely fix and responsible for the shipping charge while our customers normal use of our products.

4. A pay-needed maintenance service within warranty, we will fix:

 1) Damage caused by artificial or nature force majeure;

 2) Damage caused by improper use;

 3) Damage caused by individual remake,decomposition or assembling;

 4) Damage caused by fell,move,scratch,broken or lighting inflow.

AQs: Frequently Asked Questions about SMD5050 12V  LED Strip light

1. Can the LED strips be cut or trimmed?
A: Yes! You can easily cut the LED strips. Use a sharp utility knife. The LEDs are wired in groups of 3, so you should cut between sets of 3 LEDs.

Note: Some of the shorter lengths can't be cut because of a critical power wire inside. Before you cut, just make sure you won't be cutting a power wire, otherwise your LED strip could be damaged.

2. Can the cut section of the strip be re-used?
A: While it is physically possible, it is not a simple procedure and not worth the effort. For practical purposes, you are better off discarding the cut portion.

3. Once cut, is the strip still waterproof?
A: If you cut it right, it will maintain a degree of "weather resistance". But to make a cut strip fully waterproof again, we recommend you add some silicone sealant to the cut end.

4. Do the LED strips require resistors?
A: No. The LED strips do not require any resistors. They are ready to work on any 12 volt power source.