China Manufacturer Cylinder Head Pressure Tester Machine

China Manufacturer cylinder head pressure tester machine               

Features

1. Accurate measurement of flow ,pressure, peak pressure and temperature .
2. Safe to use in both directions of flow. Internal oil by-pass protects muitimeter and operate against overpressure
3. Bi-directional for unrestricted connection and simplified testing.
4. Fast checks on pumps ,motors, valves ,cylinders ,hydrostatic transmissions.
5. Easy to operate controls. Connect into the hydraulic system and simply ‘switch on”.
6. Portable and lightweight with the case for easier viewing and cleaning.
7. Rechargeable power: lithium battedes 12v.

Connections

Flow block connection by flexible hoses 3-6 feet (1-2 meters)

Adaptors

Adaptor fitting kits and flanges are available to suit the range of flow blocks.

Installation

MYTH series hydraulic tester can be installed at any point in hydraulic pipeline .The hydraulic oil flow from input to output (input) of the hydraulic tester must keep over 30cm from elbows /the links and valves.

Attention: You must open the loading valve when you start the instrument .If the loading valve is closed , it is dangerous.

1)       Once the hydraulic tester works ,it could be regulated by loading valve.

2)       The cold weather could effect the testing precision ,when the hydraulic oil keeps about 30? The hydraulic tester could work well.

3)       Please close the switch after testing.

4)       Please open pressure loading valve before testing.