ITC T-2D120R Series 120W 240W 350W 500W 2 Channel Class D Audio Amplifier with RS232

ITC T-2D120R Series 120W 240W 350W 500W 2 Channel Class D Audio Amplifier with RS232

From one hand, switching power technology with APFC (Active power factor correction) has enhanced the efficiency up to 85%.

From another hand, rational cooling system keeps it operate at less than 55 degree even at severe working condition, which prolong its service life. 

The amplifier is designed in both tabletop and rack mount of 1.5U. The output power of this series is optical such as 120W, 240W, 350W and 500W. On the rear panel, there is a speaker output at 100V. A line input by phoenix connector for remote control and status monitor. There is also a RS232 for volume remote control, remote status monitoring, remote control standby. With protection function of protection includes high temp, overload and short-circuit.

ITC T-2D120R Series 120W 240W 350W 500W 2 Channel Class D Audio Amplifier with RS232  

* Built in active bandpass filter to effectively filter out useless audio signal.

* 2 channel balanced line input, power output of 2 x 120W/240W/350W/500W.

* Independent volume control. 

* LED indicator for signal, peak, protection, power supply signal.

* With amplifier output monitor, standby control and standby cascade port.

* With RS232 for remote switcher of ON/OFF, monitoring working status, to adjust 4 channel volume control and read output fault, and to activate amp standby.

* With DC24V input, with protection of wide voltage range (DC 21.6V ~ 26.5V), to avoid damage

 to the equipment in case of long-term feed failure from backup battery or voltage is too high.

* AC110V or 230V and DC 24V power supplied.

* Electrical isolation for device, signal input and output, it meets the demand of 3C, UL, IEC60065 certification.

* Built in protection curcuit for short circuit, overload, overheating.

ITC T-2D120R Series 120W 240W 350W 500W 2 Channel Class D Audio Amplifier with RS232