HDMI Extender 200 feet through Double Cat5e/6/7

Specifications

hdmi extender 200 feet
1.Professional hdmi extender
2.Manufacturer
3.Cat6 568B support
4.60 metres extend

HDMI Extender 200 feet metres through Double Cat5e/6/7

 

I.Description: 

The Extender is based on the HDBaseT technology. It extends your HD display with the resolutions of 1080p/60Hz up to 200 feet (60 meters) away from your HDMI or DVI-D source using one . It also extends Ethernet and provides an IR back channel to control AV sources using the same CAT5e/6/7 cable. The three Ethernet ports on both the Sender and Receiver are connected to standard network devices such as 100Base-T routers and hubs. Built-in IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices.

This HDMI Extender has many features that enable it to perform in a superior manner. Among those features you will find:

 

II.Features:

1,Support HDCP

2,Support uncompressed HDMI signal.

3,Enables HDMI10.2 Gbps and 100Mbps Ethernet in parallel over a single 100m Cat5e/6 cable.

4,Supports 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.

5,Support 1080p@60Hz@48bit pixels

6,Support 3D pass-through.

7,Support CEC pass-through.

8,Supports uncompressed audio such as LPCM.

10,Supports compressed audio such as DTS Digital, Dolby Digital(including DTS-HD and Dolby  True HD)

11, There are 3 standard Ethernet ports with switching capabilities on each unit. There is no difference 12,between the 3 and any type of connection topology is permitted.

13, Built-in IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices.

14,CAT5e/6/7 cable follows the standard of IEEE-568B.

 

III.Picture: