Competitive Price- Adjustable Warehouse Cantilever Rack/Cantilever arm rack good for storage long or heavy materials

Cantilever Storage Racking(arm rack)

is a multi-level, high storage, special rack designed to handle many types and sizes of products. With freedom from upright column interference, it allows easier product placement and removal. In its basic form, a one bay Cantilever Rack consists of two vertical columns with horizontal load bearing arms attached by fixing at various levels. The horizontal load bearing arms project out from one or both sides of the upright columns at approximately 90 degrees. These racks are used to store rolls of carpet, lumber, pipe, or any long mid-duty materials

It's mainly used in the mechanical manufacturing  industry and markets for building materials.

 Specification:

Lengh of single arm 400 to 1000mm

Height up to 6000mm.

Loading capacity 400 to 1500kg per Arm

Components of cantilever racking  :

1.Its Column used by cold-rolled H section steel or steel

2.the arm with square tube, cold-rolled steel or H beam, used between the cantilever and the column-type or boltedtype connectors

3.base and column-type bolt connection between the use of the base with cold-rolled steel or H beam.

Production process:

       The base of cantilever racking or the exclusive use of h profile steel production. h bearing steel according to the requirements of the appropriate choice of the national standard steel. Cantilever Racking do use specific sections of the base, the two back to back c steel plates welded together with the connection, the connection plate width is the width of the column. Two c type steel column welded connection after location in the open eye bolts for easy connection with the column. Bottom edge welded connection for easy expansion bolt connected with the ground.

       Cantilever Racking column by welding together two pieces of c beam. c steel beam to q235 quality for raw materials, steel rolling mill line after rolling into the c, in the automatic punch out of the cantilever connection control, hole spacing 140mm. In the column below, such as by way connected with the h beam welding a connecting plate. Connection with specific sections, such as by way of open joints in the bottom column bolt holes.

The cantilever racking has particular advantages for the storage of  strip type cargos,such as tubing and wire,etc. According to the loading capacity, it can be divided into three types: light duty,middle duty and heavy duty shelf; According to the structural form, it can be divided into single-sided and double-sided cantilever rack provides most efficient solution for storing irregular awkward or long items such as furniture, timber, pipe, steel bars, tubes, plasterboard, windows and doors etc

Cantilever Racking's arm locations can be easily and efficiently adjusted to suit your specific requirements. So no matter how large, small, long or short your storage problems are,
Cantilever Racking system will provide you with the most economical and practical solution.

Cantilever Racking is available in Single and Double Sided Configurations

Product Showcase: